Sale!

Three-phase epoxy cast high-voltage transformer power,50KVA 220V/380V 3 phase transfommer,can be customized special transformer

Category:

Description

Three-phase epoxy cast high-voltage transformer power,50KVA  220V/380V 3 phase transfommer,can be customized special transformer

Three-phase High-voltage Power Transformer

1.Product introduction

Three-phase high-voltage power  transformers can be widely used in industry, such as start spot welding machine, automatic welding machine, butt welding machine, straightening machine, steel wire rolling machine, diffusion welding machine, seam welding, roll welding, touch welding, row welding machine etc.

 

 

2. Normal operating conditions

Three-phase high-voltage power transformer should be able to work normally under the following conditions:

a) Altitude: not more than 1000m;

b) Ambient temperature: -15 ℃ ~ + 40 ℃

c) The relative humidity of the air does not exceed 95% (at + 25 ℃);

d) In a gas or steam environment without damage to insulation;

e) Used in explosive environment without methane coal dust.

 

3. Product parameters

 

Product nameThree-phase high-voltage power transformer
Capacity50kVA
Frequency50/60Hz
Input voltage220/380V (can be customized)
Output voltage15V(can be customized)
Ambient temperature 15 ℃ ~ + 40 ℃
Insulation resistance≥50MΩ
Effectiveness95%
Waveform distortionNo  additional waveform distortion
Overload capacity2 times rated current, maintain 1min
Note: Special current and voltage can be customized according to requirements!

 

4.Product details

 

1) The primary coil is fired with 180° high temperature resistant insulated enamelled pure

copper wire, and the windings are neatly arranged to improve the withstand voltage level

and reduce the no-load loss.

 

2) The iron core made of  cold-rolled silicon steel sheets is closely stacked,

neatly arranged and tightly structured, with high magnetic flux density, reducing loss and

noise, and saving energy.

 

3) The high-voltage transformer is cast with epoxy resin, which has the characteristics

of insulation, corrosion resistance and heat resistance, which improves the insulation

effect of the transformer.

 

4) Single-phase high-voltage transformer secondary is wound with high temperature

resistant copper wire, high conductivity, low resistance, low loss, improve productivity,

and can be customized according to requirements.

 

5.Product shows

 

 

Company Profile

 

Why Choose Us

 

Certifications

 

Packaging

FAQ

 

 

 

 

Additional information

Place of Origin:

Zhejiang, China

Brand Name:

SNTOOM

Model Number:

Single-phase high-voltage power transformer

Usage:

Instrument

Phase:

Three

Coil Structure:

TOROIDAL

Coil Number:

AUTOTRANSFORMER

Product name:

Three-phase high-voltage power transformer

Model:

50KVA~1250KVA

Input Voltage:

220v/380v

Output Voltage:

15v

Short-circuit impedance:

4% / 6%

No-load current:

1.0~1.8%

Connection Group:

Dyn11 / Dy11

Product type:

IP20

Frequency:

50/60Hz

Ambient temperature:

-15℃ – 40℃