Low Odor Laser Rubber 8 1/4″ x 11 3/4″ Grey Red Color Office Engraving Rubber For Stamps
وصف
Low Odor Laser Rubber 8 1/4″ x 11 3/4″ Grey Red Color
Office Engraving Rubber For Stamps
وصف المنتجات
ملكنا Low Odor Laser Rubber is offered in sheets measuring 8 1/4″ x 11 3/4″ (A4). Grey color. It has the same engraving characteristics as the standard laser rubber but is not as odoriferous, engraving with very little to no odor.
ملكنا Standard Laser Polymer is supplied in A4 sheets. Clear color. Laser Polymer burns with very little odor.
Art Stamp Laser Polymer engraves like Standard Laser Polymer, but this material is crystal clear and the substrate backing is removable to allow the user to attach the die to an acrylic block for printing.
All of these materials need to be washed with soap and water after engraving. Make sure your laser equipment is suitable for engraving stamp dies. Check with your laser equipment manufacturer to determine compatability of equipment and software.
These settings are a good starting point as you begin test engraving our materials. Use your laser’s software settings for “stamp” mode or “3D effects” mode. Adjust speed and power settings as needed. Use your machine’s air assist mode while engraving. Observe the following precautions:
• Laser engraving or cutting rubber or polymer can possibly ignite the material. Never leave the laser system running unattended for any reason.
• Laser engraving or cutting rubber or polymer can produce foul odors, although engraving low odor rubber or polymer is much less odoriferous. You may need to particulate filter or odor filter your exhaust depending on your environment, installation location and local air quality control regulations.
• Laser engraving or cutting rubber or polymer can produce abrasive dust and smoke. You will need to clean your laser more frequently to reduce wear and tear and keep the optics clear.
الشهادات
معلومة اضافية
اكتب: | Standard Stamp |
---|---|
مادة: | ممحاة, Pre-Vulcanized Laser Rubber |
يستخدم: | مكتب |
اسم العلامة التجارية: | JXB |
رقم الموديل: | JXBRS-0135 |
مكان المنشأ: | خبى, الصين |
اسم المنتج: | Low Odor Laser Rubber Grey Color Office Engraving Rubber For Stamps |
اللون: | Grey/Red |
طلب: | CO2 Laser Machine Engravable Rubber & Polymer |
بحجم: | 8 1/4" x 11 3/4"(A4) |
سماكة: | 2.3مم |
موك: | 20 قِطَع |
Surface: | Matte |
صلابة: | 60+-5 Shore |
Ink Type: | Oil water base |