230V Ignition transformers for gas burner
Beschreibung
Einzelheiten
characteristics of large ignition energy, high efficiency, stable and reliable operation.Compared with other electronic igniters,
they have the following advantages:
● The whole product adopts an integrated module structure, which is very convenient for installation and wiring
● Special structure is adopted to avoid the problem of electronic components often breaking down in traditional electronic igniter
● The short circuit during ignition will not damage the ignition transformer. It should be used with the ignition electrode. Das
design of the discharge gap of the ignition electrode should meet the requirements of the discharge distance of the ignition
transformer in the technical parameters.
2. Installation and wiring
2.1 Installation instructions
2.1.1 Note that the operating environment temperature of the temperature ignition transformer is -20℃ ~ +60℃. Do not work at too
high temperature for a long time, otherwise the service life of the ignition transformer will be reduced.
2.1.2 Note location In general, the ignition transformer can be installed near the ignition nozzle.If the temperature near the
ignition nozzle is higher than 60℃, it can be properly installed away from the ignition nozzle.
2. 1.3 Installation Method The ignition transformer is wall-mounted.2.2.2 Power wiring Connect the zero line and the fire line of
the power cord to the blue line and the brown line of the ignition transformer respectively 2.2.3 Ignition wiring Connect the
high-voltage output line to the tail nut of the ignition electrode and then connect the two-color line to the housing of the
ignition electrode.
3. Technical parameters
3.1 Stromversorgung: AC 220V/50Hz
3. 2 High voltage output: 8KV
3. 3 Peak output: 11KV
3.4 output current: 20mA
3. 5 Discharge gap: 3 ~ 5mm
3. 6 Ambient temperature: -20℃ ~ +60℃
3. 7 Relative Luftfeuchtigkeit: 45% ~ 95%
3. 8 Wiring mode: four-wire system
4. Notes
4.1 The two-color line of the ignition transformer must be connected to the housing of the ignition electrode reliably.
4.2 In order not to interfere with the normal operation of other equipment, the high-voltage output line of the ignition
transformer should not be threaded in the same pipe with the signal line of other equipment, and should be threaded separately.4.
3 After the wiring is correct, if the ignition electrode cannot be discharged, please check whether there is a short circuit in
the ignition electrode first. Often, short circuit will cause permanent damage to the ignition transformer.
Größe | 100*92*73mm |
Gewicht | 2.5kg/pcs |
Our service
2. Stable supplying ability.
3. Fabrikpreis.
4. Do packaging and brand as your requirement.
Service nach dem Verkauf
1. We deal with your compains within 24 Std..
2. 12 months warranty after you receiving product.
3. Any quality problem within 7 days since product received (except for damage of misoperation) , replacement for free or full
payment return is accepted.
EIN: 1-2 days for products in stock, products out of stock in 10-15 days after payment.
Q: Stellen Sie Proben zur Verfügung? ? ist es kostenlos oder extra
EIN: Jawohl, we can return the sample fee after confirming an bulk order.
Q: Wie lauten Ihre Zahlungsbedingungen? ?
EIN: T/T .Western Union and Paypal.
Wenn Sie eine andere Frage haben, Sie können uns gerne kontaktieren.
Zusätzliche Information
| Herkunftsort: | China |
|---|---|
| Modellnummer: | TZI 7,5-12 100W |
| Verwendungszweck: | Beleuchtung |
| Frequenz: | 50/60Hertz |
| Anwendung: | Beleuchtung |
| Leistung: | 100w |
| Farbe: | Schwarz |
| Eingangsspannung: | 230v |