Verkauf!

F-MPM110 Multifunction Electric Power Meter

Kategorie:

Beschreibung

F-MPM110 Multifunction Electric Power Meter

Merkmale

Suit for LV/ HV Voltage System
For low voltage system, direct connect up to 690 v (L-L) AC
For high voltage system, support connect up to 65kV

Ture-RMS Measuring Parameter
True-RMS measuring parameters includes:
U, I, P, Q, S, PF, F, kWh, kvarh, kVAh

Demand Calculation
2 kinds of demand modes: fixed block and rolling block

Power Quality Analysis
31st Harmonic analysis, K factor, unbalance etc.

TOU (Multi-tariff billing), Historical Data of 31 Days and 12 Monate
TOU, 4 tariffs, 8 time period in 24 Std.

Max./ Min. Record (U, I, P, Q*, S*)

Under/ Over Limit Alarm

64M Bit Memory, Build-in Web
Real-time data inquiry by Web
Save monitoring data (Time interval
settable 1min, 5 Mindest, 10Mindest,15Mindest, 30Mindest)
Support FTP for download memory data

CO2 (Carbon Dioxide) Calculation for kWh

Multiple Communication
BACnet MS/TP Protocol (RS485 port)
MODBUS-RTU Protocol (RS485 Port)
MODBUS-TCP/IP Protocol (Ethernet port )

DI / DO

High Accuracy
Active energy: according to IEC62053-22, class 0.5s
Reactive energy: according to IEC62053-23, class 2

Spezifikation
Basic Function

Real time metering

Stromspannung
Ua, Ub, Uc, Uab, Ubc, Uca, UL-L avg, UL-N avg
Aktuell
Ia, Ib, Ic, Im, Iavg
Leistung
Pa, Pb, Pc, ∑P, Qa, Qb, Qc, ∑Q, Sa, Sb,Sc, ∑S
Power Factor
PFa, PFb, PFc, ∑PF
Energie
kWh, kvarh, kVAh *
CO2 (Carbon dioxide)
Frequenz
F
Demand & max. Demand
Dmd_I, Dmd_P, Dmd_Q ,Dmd_S
Max./ Min. Value
Max./ min. (U, I, P, Q*, S*)
Multi-tariff Energy *
Phase Angle *
Power Quality Analysis
Unbalance
U_unbl *, I_unbl *
Harmonic (31st )
THDu, THDi, TOHDu, TOHDi, TEHDu, TEHDi, HRU *, RHI *
Harmonic RMS (0-31st )
Harmonic RMS-U *, Harmonic RMS-I *, Harmonic RMS-P *
Harmonic energy (1st -13th )
Voltage crest factor, current K factor, Load rate, Voltage deviation, Frequency deviation
Running time record for power-on period and qualified voltage & current *
Setpoint Alarm
Over/ under limit alarm
3DI +2 DO
3 status input + 2 relay output
RS485
Modbus-RTU protocol
Record Function
SOE (event log), Real-time clock ( yyyy-mm-dd hh:mm:ss) *
Voltage/ frequency deviation, Voltage unbalance record
Optional Module
SW
4 status input (wet contact)
LAN
64M bit memory + Ethernet TCP/IP
SD
4 status input (dry contact)
KI
2 analog input (4-20mA)
C *
The 2nd RS485
AO
2 analog output (4-20mA)
Ep *
2 pulse output
BA
BACnet MS/TP protocol
R
2 relay output
* means some of function can’t be read through BACnet communication port
Parameter
Genauigkeit
Auflösung
Messbereich

Stromspannung

0.2%

0.01v

Direct: 690Vph-ph
PT primary: 0.001kV~65kV (settable)
PT secondary: 1~398V (settable)
Aktuell
0.2%
0.001EIN
CT primary: 1~9,999A (settable)
CT secondary: 1 A or 5A
Leistung
0.5%
0.1W/var/ VA
each phase: 0~649.9MW/ Mvar/ MVA
Gesamt: 0~1949.8MW/ Mvar/ MVA
Power Factor
0.5%
0.001
-1.000~+1.000
Frequenz
0.01
0.01Hertz
45~ 65 Hertz
Active Energy
0.5%
0.1kWh
0~ 99,999,999.9 kWh
Reactive Energy
2.0%
0.1kvarh
0~ 99,999,999.9 kvarh
Apparent Energy
1.0%
0.1kVAh
0~ 99,999,999.9 kVAh
THD
1.0%
0.001
0~100.0%
Individual Harmonic
1.0%
0.001
0~100.0%
Un-balance
1.0%
0.001
0~100.0%
Connection mode
3-phase 3-wire, 3-phase 4-wire, 1-phase 2-wire

Communicati-on

Modbus-RTU Protocol

RS485 serial
Baud rate: 2400, 4800, 9600, 19200, 38400bps
Adresse: 1~247
Messung
True RMS, 1 sec refresh time

Eingang

Rate current: 1A or 5A
Rate voltage:
Direct 120, 220v, 240v, 277v, 398Vph-N (Optional)
PT secondary: 1~398V (settable)
Frequenz: 50/ 60Hertz
Modbus-TCP/ IP

Ethernet communication port
Support connect 10M/100M ethernet, Modbus TCP/IP, Web, FTP

Überlast

120% of rated, continuously
Instantaneous current: 10 times/ sec
Instantaneous voltage: 2 times/ sec

BACnet MS/TP protocol
RS485 serial

Baud rate: 2400, 4800, 9600, 19200, 38400, 57600, 76800bps

Adresse: 1…127, excluding 99

Status input
Wet contact, external power supply
Relay output
Node capacity: 250VAC/5A
Abmessungen

(L x W x H)

F-MPM110:

Panel: 96 x 96 x 13.5 mm

Cut-out: 90 x 90 x 58.6 mm (basic)

90 x 90 x 80.1 mm (optional module)

F-MPM110-DR:

Panel: 96 x 96 x 12 mm

Cut-out: 90 x 90 x 58.6 mm (basic)

Pulse output
Pulse constant: 1000~9999 programmable
Pulse width: 60~100ms programmable
Formula: 1 pulse = (1÷ pulse constant ×PT ×CT) kWh

Stromversorgung

85 ~265VAC,85~265VDC (When select P1)
100~420VAC, 100~400VDC (When select P2)
Power loss
<5VA
Gewicht
Basic unit: approx 550gr.
Optional module: 50gr.
IP index
IP52 (front panel) and IP30 (Fall)
Umfeld

Main Module & and other Modules
Betriebstemperatur: -10℃~ +55 ℃
Lagertemperatur: -40℃~ +70 ℃
Feuchtigkeit: 5%~95% non-condensing
Power frequency withstand voltage
AC 2KV/minute
Insulation resistance
≥50MΩ
BACnet Module
Betriebstemperatur: 0℃~ +50 ℃

Lagertemperatur: -5℃~ +75 ℃

Feuchtigkeit: 10%~95% non-condensing

Impulse withstand voltage
4kV (peak), 1.2/50uS
Standard(EMV)
Electrostatic discharge immunity test
IEC 61000-4-2,Level 4
Surge immunity test (1, 2/50μs~8/20μs)
IEC 61000-4-5,Level 3
Radiated immunity test
IEC 61000-4-3,Level 3
Conducted emissions
EN 55022,Class B
Electrical fast transient /burst immunity test
IEC 61000-4-4,Level 4
Radiated emissions
EN 55022,Class B
Installation
Verwandte Produkte

F-DEM130 DIN Rail Energy Meter

F-MPM100 Multifunction Meter

F-PQA100 Power Quality Analysis

Zusätzliche Information

Herkunftsort:

Fujian, China

Markenname:

Four-Faith

Modellnummer:

F-MPM110

Measuring Current Range:

0~999999.9A

Measuring Voltage Range:

0~999999.9

Genauigkeitsklasse:

Class 0.5

Betriebstemperatur:

-10℃~ +55 ℃

Maße:

96 x 96 x 12 mm

Connection Mode:

3 phase 3 wires, 3 phase 4 wires

Messung:

True RMS, 1 sec refresh time

Eingang:

Nennstrom: 5A or 1A Rated voltage: 220/380v, 35Hz~65Hz

Stromversorgung:

AC 85~265V or DC 100~300V

Power loss:

<5VA

IP index:

IP54 (front panel) and IP20 (Fall)

Gewicht:

Ca. 500gr.

Name:

F-MPM110 Multifunction Electric Power Meter