Factory supply big diameter dredge rubber hose
Περιγραφή
big diameter dredge rubber hose / flexible dredging hose
1. Inner cover with excellent abrasion resistant and high quality. Wearing colored indicator layer
2. Outer cover with excellent ageing resistance and corrosion resistance.
3. Easy installation,Good adhesion,μεγάλη διάρκεια ζωής, easy assembly.
4. Flexible floating rubber dredging suction hose are used to convey silts and gravels with dredgers.
5. The thinkness of the pipe wall is from 20mm to 80mm.
6. The suitable working temperature ranges from -20°C to 80°C.
7. The large diameter is from 200mm to 1300mm.
ΕΝΑpplication: Flexible floating rubber dredging suction hose are used with dredgers for silt ,gravels, port, προκυμαία, seawater,sand conveyance and discharging flood etc.
Χαρακτηριστικά: Flexible, Anti-wave, Wear-resistance, Weather-resistance, Aging-resistance, seawater resistance
Working pressure:10−25 bar
Temperature range: -30−+80 °C
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Technical parameters:
Hose lining: NR, SBR,BR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: SBR and CR blend
Inside Diameter | Working Pressure | Burst Pressure | Vacuum Pressure | Adhesive Strength | Abrasion value | Μήκος | ||||
mm | ίντσα | Mpa | μπαρ | Mpa | μπαρ | Mpa | μπαρ | KN/m | cm3 | Μ |
254 | 10″ | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.0-11.8 |
400 | 16″ | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.0-11.8 |
600 | 24″ | 1.2 | 12 | 3.6 | 36 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-11.8 |
1300 | 52″ | 1.2 | 12 | 3.6 | 36 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-11.8 |
We can produce the Flexible floating rubber dredging suction hose up to ID 1300mm, any other parameter can be by your requirements.
Επιπλέον πληροφορίες
| Τόπο καταγωγής: | Shandong, Κίνα |
|---|---|
| Μάρκα: | Great |
| Processing Service: | Moulding, Τομή |
| Ονομασία προϊόντος: | big diameter dredge rubber hose |
| Inner rubber: | high quality abrasion resistance synthetic rubber |
| Working pressure: | 1.0-2.5Mpa |
| Εφαρμογή: | used for suctoin and discharge mud or water on dredger |
| Reinforcement layer: | hing tensile tire cord (suction type with helix wire or steel rings) |
| Τύπος: | hydraulic dredge |
| Guarantee period: | 1 έτος |
| Temperature range: | -30°C to 80°C |
| Cover rubber: | NR,SBR blend rubber |