grow system automatic ventilation Control

grow system automatic ventilation Control

Advantages of the machine for ventilation

Modern greenhouses covered with cellular polycarbonate, which is very good at trapping heat. Space within such structures fast enough heated even in cloudy weather. Επομένως, it is necessary to carefully monitor the temperature. But we go to work, do their business, and how do we know that the lunch in the garden of full sun is shining and the temperature in the greenhouse rose to 45 βαθμούς? Or vice versa is rain and very cold? It is automatic for ventilation and solves this problem.

The principle of operation of the machine for ventilation

This device is fully autonomously and is powered by expansion of the special liquid under the influence of temperature. The higher the temperature, the greater the expanding fluid in a cylinder, and the more air vents. The lower the temperature, the greater the fluid compressed in the cylinder by closing the window. This device is intended to automate the process of ventilation, leaving you only the most important functions for the growing of crops.

Installing the machine

This mechanism has a specific focus, which are attached to the roll bar.

Comes with detailed installation instructions and screws for fixing the machine.

Automatic hydraulic

Operating Modes to optimize the temperature in the greenhouse by ventilation depending on the outside temperature. Ετσι, in the heat of the greenhouse pane opens wide, and it is a guarantee: overheating in the greenhouse will not. The rest of the machine opens the window as needed, providing a moderately warm and humid climate in the greenhouse. Automatic hydraulic reliable assistant to your crop. The work is done automatically, without additional sources of electricity.

principle of operation

Based on heating from the sun working fluid in termotsilindre. liquid piston. Piston opens the window of the greenhouse. As the sun sets, the temperature drops in the greenhouse, window .

Uvelichenie temperature teplitse is performed by moving the bottom bracket cylinder down.

Installation is simple and can be performed independently.

airing greenhouses

Is a prerequisite for the normal development of plants grown in them. High temperatura air and the presence of greenhouse gases can be detrimental to greenhouse crops, contribute to the spread of plant diseases and pests.

Simple, reliable design. Available temperature adjustment at which begins to open the window in the range of 16 προς την 25 βαθμούς. At 30 degrees stem extends to the maximum available length. The maximum weight of not more than 7kg vents. Machine for greenhouse ventilation can not be used at temperatures above 50 βαθμούς. The principle of operation of the system is based on the automatic air vents heated fluid in termotsilindre under sunlight tepla. Heated, the liquid expands, so that is driven by a piston that opens the window. By reducing the air temperature in the evening or during a cold snap, the volume of liquid is reduced and the ventilator is closed. Such an automaton for ventilation can be operated in any greenhouse or greenhouse, and setting it in the pane is so simple that it can be done independently. The device can operate in the window, the maximum weight of not more than 7 κιλό. Pane opens on the range up to 45 εκ.

Ventilator machine – is an effective solution to the problem of ventilation greenhouses and hothouses. We make life more comfortable cottagers!

All elements of the machine for ventilation are made of aluminum alloy, which guarantees protection from corrosion for years to come.

IMPORTANT!

NA winter piston need to remove and clean in warm meeting facility, in order to avoid freezing of thermo oil. thus you prolonging the life of the machine for greenhouses for many years.

Συσκευασία ;

Contact us: