Professional Manufacturer monel 400 round bar

monel 400 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of monel 400 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of -400 degrees Fahrenheit. Alloy K-500 also stays non-magnetic to -200 degrees Fahrenheit.

Compared with Monel 400,monel 400 has more good mechanical properties,hardness,corrosion resistance performance and long term stability.
It is widely used on many aspects,like pump shafts,oil well tools and instruments,doctor blades and scrapers,springs,valve trim,faseners,and marine propeller shafts.

monel 400 International brand:

Chemical Composition:

Physical Properties:

Mechanical Properties:

Production Standard:

Monel Form:Σωλήνας / Tube(welded and seamless),Plate / Sheet,Bar,Wire, Εξαρτήματα

Wire: 0.01-10mm

Λωρίδα: 0.05*5.0-5.0*250mm

Bar: φ4-50mm;Length 2000-5000mm

Σωλήνας: φ6-273mm;δ1-30mm;Length 1000-8000mm

Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm

Jiangsu Taigang Puxin Stainless Steel Co., Ε.Π.Ε. is a sophisticated manufacturer of steel products. It’s located in Wuxi, which is the biggest base of stainless steel products in China and is also near to Shanghai. We have been devoted in steel industry for nearly 10 years and developed many faithful clients in Europe, νότια Αμερική, Mid-East, India and etc. We have a wide range of stainless steel products. Other metal products are also available if customers require. The annual export volume is about 1000,000 τόνους. And we promised almost all inquiry will be dealed with within 3 ώρες. “Punctuality,Integrity, Humanization service” has always been the development principle that strictly adhered by our company and all stuff all the time.

Στο παρόν, we have five finishing rolling production lines and two hot rolling production lines . Further more advanced automatic width control system (AWC), automatic thickness control system (AGC), bending roll system, work roll channeling roll system and other effective measures are adopted to guarantee product quality. Well-equipped production lines and advanced control systems work together to make sure all the stainless steel products we made are in line with the national standards.

1.Q: Είστε εμπορική εταιρεία ή κατασκευαστής ?

ΕΝΑ: We are manufactory that specialized in stainless steel products.

2.Q: Πόσος είναι ο χρόνος παράδοσής σας?

ΕΝΑ:It takes around 3-5 days for the regular models, και 7 προς την 10 working days for the special sizes and processing. It is based on the order quantity and requirement..

3.Q: Do you provide samples ? Is it free or extra ?

ΕΝΑ:Ναί, we would send you small samples for free and need around 4 προς την 6 ημέρες.

4.Q: Ποιοι είναι οι όροι πληρωμής σας ?

ΕΝΑ: Πληρωμή<=5000USD, 100% εκ των προτέρων. Πληρωμή>=5000USD, 30% T / T εκ των προτέρων ,υπόλοιπο πριν από την αποστολή.

5.Q: How do you protect the stainless steel sheet surface?

ΕΝΑ: We have a high request for our quality, and each plate must have the second layer PVC laser film, one layer is 7C thick, double lays are 14c thick.

6.Q: What is the usage of your products?

ΕΝΑ: It is widely used for elevator and kitchen decoration, Luxury door , wall panel and indoor decoration, advertising board, ceiling corridor, hotel hall, storage rack and kinds of entertainment places, και τα λοιπά.

7.Q: Do you have any assurance for your products?

ΕΝΑ: It will have the mill test for quality and material report for each shipment.