solar heater
Περιγραφή
Solar Water Heater Generally information:
1. LUCKY – Solar Water Heater working principle:
The vacuum tube absorb the solar ray and conduct the heat to heat-pipe (inside) by the aluminum slice, because the heat-pipe is connected with the copper connector which in the water tank, so there exists heat exchanging between the heat- pipe and copper connector, when the heat exchanging goes on, the water in the tank will be heated and become hot water.
2. Advantage of LUCKY – Solar Water Heater:
1. Pressurized system ensure to provide strong water flow for shower
2. This type doesn’t need any controller, circulation pump, expansion pump. Feeder tank, it also can supplement cold water automatic
3. We use the advanced ring-argon arc welding .ensure the high quality.
4. Thickness of inner tank: 1.2mm-2.0mm food grade SUS304 stainless steel
5. Even there is a tube broken; the system can work in a good condition
6. This type is cheaper and easy install than the separated pressurized solar water heater. i think it will popular and have a good market .
3. The Heat pipe – Evacuated tube:
A heat pipe works as a solar energy absorber inside the evacuated tube and transfers the absorbed solar energy to a working vaporizable fluid. When the heat pipe reaches 30ºC, the fluid will vaporize. This vapor rapidly rises to the top of the heat pipe transferring heat to the condenser. As the heat is lost at the condenser, the vapor condenses to form a liquid and returns to the bottom of the heat pipe. Then the evaporating-condensing cycle process starts again.
4. Solar evacuated tube heat pipe internals:
A further, very important factor in selecting your evacuated tube collector is the quality of the internal heat-transfer-fin as this is often overlooked and generally very thin or poorly formed to cut costs, or is even 2 ή 4 separate pieces. All this will ultimately reduce the efficiency of your collector, and as such your electricity saving.
LUCKY – Solar Water Heater Technical Parameters & specification | ||||||
WATER STORAGE TANKS | ||||||
Material of out tank | High quality Painted steel/ Stainless steel. | |||||
Material of inner tank | food grade SUS304-2B stainless steel. | |||||
Tank insulating layer | Imported polyurethane,can conserve the heat for maximum 72 ώρες | |||||
Water tank preformed hole | 7 holes: Magnesium bar, T/P valve, sensor hole, water inlet and outlet hole, electric heater,drainage. | |||||
Tank size | 420,460 470 475 550,580mm or customer demand | |||||
Συγκόλληση: | Argon arc welding | |||||
VACUUM TUBES | ||||||
Tube structure | All-glass double deck co-axial structure | |||||
Glass material | High borosilicate 3.3 glass | |||||
Outer tube dia. & thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm | |||||
Inner tube dia.& thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm | |||||
Tube size | 58*1800mm | |||||
Absorptive coating property | Δομή | AL/AL-ALN(H)/AL-ALN(μεγάλο)/ALN or Cu/SS-ALN(H)/SS-ALN(μεγάλο)/ALN | ||||
Sediment method | Single target or Three targets – magnetron sputtering plating | |||||
Specific absorption | 0.90-0.93(AM1.5) / 0.93-0.96(AM1.5) | |||||
Emission ratio | 0.05-0.075(800C±50C) / 0.04-0.06(800C±50C) | |||||
Solar irradiation for obtaining a preset water temperature | Φ=58 H≤4.7MJ/m² | H=4.1-4.4MJ/m² / H=3.7-4.2MJ/m² | ||||
Vacuum tightness | 5.0×10¯³ Pa | |||||
Idle sunning property parameters | 220-260 m².C/KW / 260-300 m².C/KW | |||||
Average heat loss coefficient | ULT=0.6~0.7W/(M2.0C) / ULT=0.4~0.6W/(Μ2.0ντο) | |||||
Resistant Hail | ≤25mm | |||||
Useful life | 15 χρόνια | |||||
HEAT PIPES: | ||||||
Heat pipe material | TU1 copper | |||||
Heat pipe condenser size | Μπλουζα: Dia.14mm, Σώμα: Dia.8mm | |||||
Max.working temp | -30 ~250C | |||||
ΔT | 35ντο(Ακτινοβολία>=800w/m2.day) | |||||
Start-up Temperature | <=30C | |||||
Resistant Hail | ≤25mm | |||||
Useful life | 15 χρόνια | |||||
BRACKET | ||||||
Bracket: | Stronger galvanized steel / Stainless steel/aluminium alloy | |||||
Bracket angle: | 0, 18,22,38,45 προαιρετικός, pitched roof, flat roof optional. | |||||
Fastening pieces: | Made of zinc-coated stainless steel.. |
Επιπλέον πληροφορίες
Παρέχεται εξυπηρέτηση μετά την πώληση: | Δωρεάν ανταλλακτικά |
---|---|
Εγγύηση: | 5 χρόνια |
Εφαρμογή: | Νοικοκυριό |
Πηγή ενέργειας: | Ηλιακός |
Τύπος: | Evacuated Tube |
Circulation Type: | Direct / Open Loop (Active) |
Connection Type: | Direct-Plug |
Εγκατάσταση: | Ελεύθερος |
Υλικό Στέγασης: | Ανοξείδωτο ατσάλι |
Πιστοποίηση: | κε, SRCC,Solar Keymark,ISO,CE, |
Χωρητικότητα: | 100 |
Τόπο καταγωγής: | Zhejiang, Κίνα |
Μάρκα: | LUCKY |
Αριθμός μοντέλου: | JXIP-SERIAL |
πιστοποιητικό: | CE,SRCC,SOLAR KEY MARK,ISO9001 |
Frame:: | Ανοξείδωτο ατσάλι. |
Vacuum tube: | Triple target |
Heat pipe condenser size: | 14*70mm |
Heat pipe material: | TU1 pure copper |
αξεσουάρ:: | T/P valves, check valves, electric heater elments,magnesium bar. |
Inlet and out let: | 3/4 ίντσα |
Pressure bearing: | 1.2Mpa |
Ονομασία προϊόντος: | Solar Hot Water Heater |
Είδος: | Vacuum Tube Solar Collector |