Three-phase epoxy cast high-voltage transformer power,50KVA 220V/380V 3 phase transfommer,can be customized special transformer

Three-phase High-voltage Power Transformer

1.Product introduction

Three-phase high-voltage power transformers can be widely used in industry, such as start spot welding machine, automatic welding machine, butt welding machine, straightening machine, steel wire rolling machine, diffusion welding machine, seam welding, roll welding, touch welding, row welding machine etc.

2. Normal operating conditions

Three-phase high-voltage power transformer should be able to work normally under the following conditions:

ένα) Altitude: not more than 1000m;

σι) Θερμοκρασία περιβάλλοντος: -15 ℃ ~ + 40 ℃

ντο) The relative humidity of the air does not exceed 95% (στο + 25 ℃);

ρε) In a gas or steam environment without damage to insulation;

μι) Used in explosive environment without methane coal dust.

3. Παράμετροι προϊόντος

4.Λεπτομέρειες προιόντος

1) The primary coil is fired with 180° high temperature resistant insulated enamelled pure

copper wire, and the windings are neatly arranged to improve the withstand voltage level

and reduce the no-load loss.

2) The iron core made of cold-rolled silicon steel sheets is closely stacked,

neatly arranged and tightly structured, with high magnetic flux density, reducing loss and

noise, and saving energy.

3) The high-voltage transformer is cast with epoxy resin, which has the characteristics

of insulation, corrosion resistance and heat resistance, which improves the insulation

effect of the transformer.

4) Single-phase high-voltage transformer secondary is wound with high temperature

resistant copper wire, high conductivity, low resistance, low loss, improve productivity,

and can be customized according to requirements.

5.Product shows