Low Odor Laser Rubber 8 1/4″ X 11 3/4″ Grey Red Color Office Engraving Rubber For Stamps
Descripción
Low Odor Laser Rubber 8 1/4″ X 11 3/4″ Grey Red Color
Office Engraving Rubber For Stamps
Descripción de productos
Nuestro Low Odor Laser Rubber is offered in sheets measuring 8 1/4″ X 11 3/4″ (A4). Color gris. It has the same engraving characteristics as the standard laser rubber but is not as odoriferous, engraving with very little to no odor.
Nuestro Standard Laser Polymer is supplied in A4 sheets. Clear color. Laser Polymer burns with very little odor.
Art Stamp Laser Polymer engraves like Standard Laser Polymer, but this material is crystal clear and the substrate backing is removable to allow the user to attach the die to an acrylic block for printing.
All of these materials need to be washed with soap and water after engraving. Make sure your laser equipment is suitable for engraving stamp dies. Check with your laser equipment manufacturer to determine compatability of equipment and software.
These settings are a good starting point as you begin test engraving our materials. Use your laser’s software settings for “stamp” mode or “3D effects” mode. Adjust speed and power settings as needed. Use your machine’s air assist mode while engraving. Observe the following precautions:
• Laser engraving or cutting rubber or polymer can possibly ignite the material. Never leave the laser system running unattended for any reason.
• Laser engraving or cutting rubber or polymer can produce foul odors, although engraving low odor rubber or polymer is much less odoriferous. You may need to particulate filter or odor filter your exhaust depending on your environment, installation location and local air quality control regulations.
• Laser engraving or cutting rubber or polymer can produce abrasive dust and smoke. You will need to clean your laser more frequently to reduce wear and tear and keep the optics clear.
Certificaciones
Información Adicional
Escribe: | Standard Stamp |
---|---|
Material: | Rubber, Pre-Vulcanized Laser Rubber |
Usar: | Office |
Nombre de la marca: | JXB |
Número de modelo: | JXBRS-0135 |
Lugar de origen: | Hebei, Porcelana |
nombre del producto: | Low Odor Laser Rubber Grey Color Office Engraving Rubber For Stamps |
Color: | Grey/Red |
Solicitud: | CO2 Laser Machine Engravable Rubber & Polymer |
Tamaño: | 8 1/4" X 11 3/4"(A4) |
Espesor: | 2.3milímetro |
MOQ: | 20 piezas |
Superficie: | Matte |
Dureza: | 60+-5 Shore |
Ink Type: | Oil water base |