wholesale products power supply 120w aus power adapter supply with customized logo
Descripción del producto
Power Input: AC 90~264V Support production for short circuit/over current/over voltage; Wide operation temperature range: -40℃~70℃; 100% full load aging test; Alta eficiencia, long life time and high reliability Meet EMC Standard; 5 years warranty.
Introducción
PI120W-48 is one economical slim 120W industrial DIN Rail power supply series, adapting to be installed on TS-35/7.5 or TS-35/15 mounting rails. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to EN61000-3-2, the norm the European Union regulates for harmonic current.
PI120W-48 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 89%, the entire series can operate at the ambient temperature between -40℃ to 70℃ under air convection. It is equipped with constant current mode for over load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus make PI120W-48 a very competitive power supply solution for industrial applications.
TECHNICAL SPECIFICATION
Modelo
PI120W-48
Producción
Group of Output
1
Voltaje CC
48V CC
Default Output Voltage
48.00-48.2V （VIN: 220VACACIONES / LOAD: 0A）
Output Rated Current
1.25A
Output Current Range
0-2.5A
Output Rated Power
120W
Total Peak Output Power
Up to 180W (Sustainable time 10S/220VAC)
Peak Output Current
13.75A(Sustainable time 10S/220VAC)
Ripple noise
Cima – Peak ≤100mV (Método de prueba: The terminal shall be in parallel with capacitance of 0.1uF and 47uF, testing at 20MHz)
Output Regulation Range
DC47～56V
Stabilized Voltage Precision
±1% (@ 90-264Vac input, 100% carga)
Line Regulation
±0.5% (@ 90-264Vac input, 100% carga)
Load Regulation
±1% (@ 90-264Vac input, 100% carga)
Temperature Coefficient
±0.03%/℃
Output Start Time
< 1.5S @ 115VAC
Output Hold Time
> 20ms @ 115VAC, > 125 ms @ 230 Vca (100% carga)
Voltage Overshoot
≤5%
Aporte
Input Voltage Range
90~264VAC
Input Rated Voltage Range
100~240VAC
Rango de frecuencia
47Hz~63Hz
Frecuencia nominal
50/60Hz
Starting Voltage
90V CA
Eficiencia
> 85.0% @ 115Vac, > 89.0% @ 230Vac
Corriente de entrada
< 1.40A @ 115Vac, < 0.80A @ 230Vac
Inrush Starting Current
< 20A @ 115Vac, < 35A @ 230Vac
Factor de potencia
> 0.99 @ 115Vac, > 0.93 @ 230Vac
Proteccion
Producción
144~180W Swing machine (Testing method: Increase the output current until enabling the protection. Modo de protección: Swing machine, Self-recovery after over-power released.)
Over power
57~70V V Swing machine (Short circuit the Pin1-2 of U8, swing machine. Output recovery to normal after removing the short circuit) Nota: Do not use external Voltaje.
Over voltage
3-3.75A swing machine (Testing method: Increase the output current until enabling the protection.) Modo de protección: Swing machine, Self-recovery after over-current released.)
Over current
It achieves the long-term short circuit by connecting a sufficient cross-sectional area copper cable (Length at 15cm±5cm) con power output port. Self-recovery to normal after removing the short circuit.
Cortocircuito
Operation Environment
Operation Temperature and Humidity
-30～70℃; 20%～95%RH
Storage Temperature and Humidity
-40℃~85℃; 10%~95%RH non-condensing
Liberation
Frequency range: 10 ~ 500Hz, Aceleración: 2GRAMO, Each sweep cycle 10min. Six sweeps along the X, Y, and Z axis
Surge
Aceleración: 20GRAMO, Duration time: 11mS, Three shocks along X, Y and Z axis
Altitude
2000metro
Safety and EMC Standard @25℃
Security Standard
GB4943/EN60950 ■Reference □Certification
Resistencia dieléctrica
Input—Output:3KVAC/10mA; Aporte–Caso:1.5KVAC/10mA; Producción—Caso:0.5KVDC/10mA Time for each testing is 1min.
Grounding Test
Test Condition: 32A/2min; Ground bond: ＜0.1 ohms.
Corriente de fuga
Input to GND ≤3.5mA; Input to output ≤0.25mA (Input 264Vac, 63Hz)
Resistencia de aislamiento
Input—Output: 10M ohmios;
EMI Conducted Interference
EN55022, EN55024, FCC PART 15 CLASS B
Radiated Interference
EN55022, EN55024, FCC PART 15 CLASS B
Harmonic current
EN61000-3-2 CLASS D
ccsme
Conducted Emission
EN61000-4-6 Level3
Radiated Emission
EN61000-4-3 Leve3 criterion B
Power Frequency Emission
EN61000-4-8 Level3
Electrostatic Emission
EN61000-4-2 Level4 criterion B
EFT
EN61000-4-4 Level4 criterion B
Surge
EN61000-4-5 Level4 criterion B
Dip and Interruption
EN61000-4-11
Dimensión (L*A*A)
135*121*40milímetro
Solicitud
Industrial Control System;
Semiconductor fabrication equipment;
Factory automation;
Electro-mechanical apparatus.
DIMENSION
BLOCK DIAGRAM
DERATING CURVE
PACKING LIST
CONTENT
QTY
UNIT
120W Industrial Power Supply (PI120W-48)
1
SET
User Guide
1
ordenador personal
Warranty Card
1
ordenador personal
Perfil de la empresa
Nuestras ventajas
Paquete & Envío
Preguntas más frecuentes
Información Adicional
Lugar de origen:
Guangdong, Porcelana
Nombre de la marca:
EWIND
Número de modelo:
EW-PI120W-48
nombre del producto:
power supply 120w aus power adapter supply with customized logo
