ZLJM series low voltage telecommunication magnetic latching DC contactor
Descripción
Magnetic latching dc contactor
1. CARACTERÍSTICAS
— 200A Contact Switching capability
— Solicitud:For Electric Control System Of Communication Power Supply,
Máquina de ingeniería, Carretilla elevadora de movimiento eléctrico, Automóvil, Tren, Moto acuática
y UPS, etc..
— Technical standard: GB14048.4-2010
— Certificado: ROHS
2. Contactor Data
Mode No. | ZLJM-200C/A1 | ZLJM-200C/A1.S | |
Contact form | Bi-stable | ||
Material de contacto | Aleación de plata | ||
Puntuación de contactos (en carga resistiva) | 200A×60V DC | 200A×120V DC | |
Caída de voltaje de contacto | ≤80mV@200A | ||
Resistencia de aislamiento | mínimo. 100MΩ at 500VDC | ||
Resistencia dieléctrica (Entre piezas eléctricas aisladas) | 1000VACACIONES 50 Hz/60 Hz (1 minuto) Leak current<1mamá | ||
Hora de recogida | máx.. 30msegundos. | ||
tiempo de abandono | máx.. 30msegundos. | ||
Impulse Width | 0.5S~1S | ||
Temperatura ambiente | -25℃~+60℃ | ||
Temperatura de almacenamiento | -40℃~+65℃ | ||
Humedad relativa | 20%~90% RH | ||
Impacto de punto fijo | (10~200)Hz, Acceleration ≤3.5g | ||
Impactante | (60~100) Operaciones/min,Acceleration ≤4g | ||
Vida útil mecánica | 100,000 Operaciones (sin carga) | ||
Vida eléctrica | 6,000 Operaciones (con carga nominal) | ||
Capacidades de conmutación de contactos auxiliares (Resistive load) | 5Un /24 VCC; 2A/48 VCC | ||
Nivel de contaminación | 100mA/5V | ||
Impulse Width | III | ||
Deber de trabajo | Continuo | ||
Modelo | Voltaje de la bobina(V) | Voltaje de trabajo de la bobina | Pick-up Voltage(V) | Drop-out Voltage(V) | Starting Actual (A) | Coil power dissipation(W) |
ZLJM-200C | 12 | 0.85tuS~1.1US | 20%~80% | 20%~80% | ≤1.2 | 15~45 |
24 | ≤0.7 | |||||
30 | ≤0.65 | |||||
36 | ≤0.65 | |||||
48 | ≤0.7 | |||||
60 | ≤0.6 | |||||
72 | ≤0.5 | |||||
80 | ≤0.4 | |||||
96 | ≤0,35 | |||||
120 | ≤0,35 |
4. Shape installation and circuit diagram
ZLJM-200C / A1
ZLJM-200C / A1.S
Dimensión(milímetro) | Tolerance grade not noted(milímetro) |
0~30 | ±0.3 |
30~60 | ±0.5 |
60~100 | ±1 |
>100 | ±2 |
Nota: 1.Accessory is the extension of the additional functions of product, kindly remark the corresponding accessory code after the main model no. when ordering. Por ejemplo: Added the additional function of TVS diode, the model no. would be: ZLJM-200C/A1.S (T)
2. Product coil is excited by positive and negative pluse,500mS≤t≤1S. long time continuous energizing is not allowed. Operation frequency should be no more than 6 ops/min. It`s square pulse (“+” connect with positive pulse, “-” connect with negative pulse) and positive pulse makes the contact close while negative pulse makes the contact open after the excitation ,the permanent magnet in product keeps the state of the contact.
Información Adicional
| Lugar de origen: | Zhejiang, Porcelana |
|---|---|
| Nombre de la marca: | Dongya |
| Número de modelo: | ZLJM-200C/48 |
| Tipo de electricidad: | corriente continua |
| Número de polo: | 1 |
| Fase: | 1 |
| Tensión nominal del circuito principal: | 12V/24V/30V/36V/48V/60V….120V |
| Corriente nominal del circuito principal: | 5A/2A |
| Corriente nominal: | 200A |
| Voltaje nominal: | ≤80V DC |
| Contact Arrangement: | Bi-stable Magnetic Latching |
| Caída de voltaje de contacto: | ≤80mV@200A |
| Certificado: | CCC/Rhos |
| Electric Life: | 20,000 Times |
| Solicitud: | Ascensor,Forklift,coche de bateria, DC motor,etc. |
| Muestra: | Libre |
| OEM: | evaluable |
| Paquete: | Carton/Pallet |