750w 1hp high torque low rpm single- phase induction ac motor
La description
ac motor use on slitting machine YL8024 750w
CONDITIONS
Température ambiante | -15℃<0<40℃ |
Altitude | Not exceed 1000m |
Tension nominale | 220v,110v~240v is available |
Rated frequency | 50HZ/60HZ |
Duty | S1(continuous) |
Classe d'isolation | B,F,H |
Protection class | IP54,IP55 |
Coolong method | IC0141 |
Notice:
1.The wiring in the correct way
2.The motor should not be run idle for a long time or overload operation and blocked at low speed,so as to avoid high temperature
3.Don’t haul the motor speed so hard,so as not to snap the internal coil
4.Gear reducer have assembly well please don’t open it or reinstall it,in order to avoid the dust or gear mesh noise
5.Motor and gear reducer of the shaft in connected to the load can’t knock gravity,extrusion,lest cause internal deforma-tion and severe noise or stuck phenomenon
Product work environment:
Wide range of the speed of the motor,speed control features smooth;
Environnement de travail:Altitude≤2500m;Température ambiante:-20℃~+60℃;Humidité relative<90%,
Storage environment requirements:Humidity of the air:-5℃~+35℃,Relative hhumidity;<70%;Well ventilated,without corrosive gas.
Informations Complémentaires
Lieu d'origine: | Zhejiang, Chine |
---|---|
Marque: | XIUSHI |
Numéro de modèle: | YL8024 |
Taper: | Moteur asynchrone |
Phase: | Monophasé |
Certificat: | CCC, ce |
Fonction de protection: | Totalement fermé |
Tension CA: | 110/ 220 V |
Efficacité: | C'EST À DIRE 2 |
Couleur: | Argent |
Matériel: | Aluminum shell |