Antistatic Bag for Cleanroom
La description
Nom du produit | ASO High Clean Permanently Antistatic Bag |
Place of Orign | Japon |
Matériau principal | PEBD |
Size/Specificaton | Personnalisé |
Applied Area | Pharmaceuticals ,semiconductor devices,electronic device |
Overview
ASO High Clean Permanently Antistatic Bag is an ultraclean antistatic bag that can be used in a cleanroom. Both the inner and outer surfaces of the bag are very clean, and particle counts on the inner surface are controlled on a lot-by-lot basis.
Conventional processing techniques that may cause bleed-out or shedding of an antistatic agent—for instance additives such as antistatic agents, carbon, heavy metals, light metals, and coatings—are not used. This product is mainly used in the semiconductor and electronic device applications, but is also safe for use in the pharmaceutical applications and it complies with the test standards of Japanese Pharmacopoeia(Polyethylene or Polypropylene containers for aqueous injections). If you would like a copy of the catalog for this product, please do not hesitate to ask us. This product is also available in standard sizes for customers who want only a small quantity of bags.
Fonctionnalités
- Unique processing technique
- Surface specific resistance: 1013Ω or below
[Particles on the inner surface]
Specimen: High Clean Permanently Antistatic Bag (0.1mm x 250mm x 300mm)
[Stable antistatic performance (measurements of surface specific resistance)]
ASO High Clean Permanently Antistatic Bag in Standard Sizes | Inner surface | Outer surface |
---|---|---|
Specimen 1 | 1.80 X 1010 | 3.46 X 1010 |
Specimen 2 | 2.04 X 1010 | 3.77 X 1010 |
Specimen 3 | 1.99 X 1010 | 3.93 X 1010 |
Specimen 4 | 2.44 X 1010 | 4.56 X 1010 |
Specimen 5 | 2.37 X 1010 | 4.34 X 1010 |
Average | 2.13 X 1010 | 4.02 X 1010 |
* [Measurement method] JIS K-6911
* The table shows measured, not guaranteed, values.
Status of compliance with standards for safe use
Normes | ||
---|---|---|
Raw material | Food Sanitation Act (Japon) | Standards and criteria for food and additives,etc. |
Produit | Japanese Pharmacopoeia | Polyethylene or Polypropylene containers for aqueous injections. |
FDA 21CFR | §177.1520 (C) 2.2 |
The inner surface of the bag is kept highly clean for safe use.
[Micron particle data]
ASO High Clean Permanently Antistatic Bag
(0.1mm×250mm×350mm)
Particle size | 2μm | 3μm | 5μm | 10μm | 25μm | 40μm | |
---|---|---|---|---|---|---|---|
Blank water | Measured value | 0 | 0 | 0 | 0 | 0 | 0 |
0 | 0 | 0 | 0 | 0 | 0 | ||
0 | 0 | 0 | 0 | 0 | 0 | ||
Maximum | 0 | 0 | 0 | 0 | 0 | 0 | |
Average | 0 | 0 | 0 | 0 | 0 | 0 | |
Minimum | 0 | 0 | 0 | 0 | 0 | 0 | |
Produit | Measured value | 1 | 0 | 0 | 0 | 0 | 0 |
2 | 2 | 1 | 1 | 0 | 0 | ||
2 | 1 | 1 | 1 | 0 | 0 | ||
Maximum | 2 | 2 | 1 | 1 | 0 | 0 | |
Average | 1 | 1 | 1 | 1 | 0 | 0 | |
Minimum | 1 | 0 | 0 | 0 | 0 | 0 |
[Measurement method]
The bag was filled with 100 mL of dust-free water with the blank count close to zero, and then tied at the top. Then 10 mL of the water was taken out of the bag and the number of particles in this sample was counted. This measurement was repeated three times and the average value calculated. The total counts are shown in the above tables.
* Measuring device: Particle counter from RION
Size/Specifications
This product is available in custom sizes.
Épaisseur: 0.06–0.1 mm, largeur: 150–1000 mm, longueur: 200–2000 mm
*Bag dimensions may fall outside the above ranges, depending on the bag size.
Eliminating particles, locating the fundamental causes of possible contaminants, and receiving no complaints from customers.
We are now in the position of manufacturing highly functional clean films, including clean plastic bags, in our specially equipped “cleanrooms”.
We, as a professional group providing olefin films, always provide our customers with latest information and high quality stable products at affordable prices based on specialized knowledge and long-term experience.
Design and manufacture of clean plastic bags,clean plastic sheets,clean plastic
tubes,and clean laminated bags
ISO 9001:2015 certification
We obtained ISO9001:2015 certification via an examination from the “SGS Japan Inc.”
[Date of certification]
December 12, 2003
[Certification No.]
UKAS JP03/060068
JAB JP09/061826
[Business place]
Head office,Clean Factory (main factory)
Informations Complémentaires
Manipulation des surfaces: | Autre |
---|---|
Usage industriel: | Pharmaceuticals ,semiconductor devices,electronic device |
Type de sac: | Vacuum Bag |
Scellage & Gérer: | Heat Seal |
Commande personnalisée: | Accepter |
Lieu d'origine: | Japon |
Numéro de modèle: | ASO High Clean Permanently Antistatic Bag |
Caractéristique: | ANTISTATIC |
Marque: | ASO |
Type de plastique: | PEBD, Additive-Free LDPE / L-LDPE / Polymer type permanent antistatic agent |
Matériel: | Plastique |