High Performance venturi wet scrubber for waste gas treatment

High Performance venturi wet scrubber for waste gas treatment

All of our products can be customized. Any sizes, formes, designs,logos meet your requirement,before quote you the price ,we will be appreciated if you can provide the information below:

1.Are you dealing with dust or waste gas?
2. the air volume;
3. Composition and concentration of waste gas;
4. Dust type and particle size;
5. Temperature of working environment;

6.Please provide the working condition and scheme on site,lf you are not clearly , we will recommend for you.

With above information we can quote exact price immediately.

The exhaust gas is introduced into the purification tower by the wind pipe. Through the packing layer, the exhaust gas and the absorption liquid are fully exposed to the absorption and neutralization reaction of the gas-liquid two phase. After the exhaust gas is purified, the fan is discharged into the atmosphere by the dehydration of the mist removal plate and the mist eliminator. The absorption liquid is pressurized by the pump at the bottom of the tower and then sprayed down at the top of the tower. Finally, it is recycled to the bottom of the tower for recycling. The purified acid mist exhaust gas is lower than the national emission standard.

Specification sheet:

Application pictures:

Adventages:

1.The efficiency of dust removal and desulfurization is high and the efficiency of desulfurization can reach 85% when using alkaline washing water.
2.The wet scrubber is small and easy to install.
3.Low water consumption and low power consumption.
4.The equipment is reliable, simple and convenient to maintain.