750w 1hp high torque low rpm single- phase induction ac motor
תיאור
ac motor use on slitting machine YL8024 750w
CONDITIONS
Ambient temperature | -15℃<0<40℃ |
Altitude | Not exceed 1000m |
מתח מדורג | 220v,110v~240v is available |
Rated frequency | 50HZ/60HZ |
Duty | S1(continuous) |
Insulation class | ב,ו,ח |
מעמד הגנה | IP54,IP55 |
Coolong method | IC0141 |
Notice:
1.The wiring in the correct way
2.The motor should not be run idle for a long time or overload operation and blocked at low speed,so as to avoid high temperature
3.Don’t haul the motor speed so hard,so as not to snap the internal coil
4.Gear reducer have assembly well please don’t open it or reinstall it,in order to avoid the dust or gear mesh noise
5.Motor and gear reducer of the shaft in connected to the load can’t knock gravity,extrusion,lest cause internal deforma-tion and severe noise or stuck phenomenon
Product work environment:
Wide range of the speed of the motor,speed control features smooth;
Working environment:Altitude≤2500m;Ambient temperature:-20℃~+60℃;Relative humidity<90%,
Storage environment requirements:Humidity of the air:-5℃~+35℃,Relative hhumidity;<70%;Well ventilated,without corrosive gas.
מידע נוסף
איזור מוצא: | ג'ה-ג'יאנג, חרסינה |
---|---|
שם מותג: | XIUSHI |
מספר דגם: | YL8024 |
סוּג: | Asynchronous Motor |
שלב: | Single-phase |
תעודה: | CCC, לִספִירַת הַנוֹצרִים |
תכונת הגנה: | Totally Enclosed |
AC Voltage: | 110/ 220 V |
יְעִילוּת: | IE 2 |
צֶבַע: | כסף |
חוֹמֶר: | Aluminum shell |