Eccentric Eddy Current Separator For Sorting Waste Scraps And Flakes With Non-ferrous Metal Aluminum And Copper
תיאור
תיאור מוצר
Eccentric Eddy Current Separator For Sorting Waste Scraps And Flakes With Non-ferrous Metal Aluminum And Copper
Eddy Current Separator can be widely used in the field of environmental protection such as waste disposal, waste electrical appliances recycling and non-ferrous metal processing industry. The non-ferrous metals are recovered from the crushing materials of the automobile dismantling plant, from the copper aluminum casting sand and smelting ash, and from the waste motor crushing materials; the non-ferrous metals are recovered from the incinerated printed circuit board, from the domestic waste, industrial waste, electronic waste treatment, waste plastic doors and windows, boiler bottom ash and other non-ferrous metals.
Applicance Area | |
1 | Aluminium Industries |
2 | E-waste Industries |
3 | Glass Industries |
4 | Foundry Industries |
5 | Plastic Industries |
Working Principle
Metal Eddy Current Separator is designed based on the principle that conductor can produce induced current in high frequency alternating magnetic field. When the machine works, it will produce a high frequency alternating strong magnetic field on the surface of the sorting magnetic roller. When the non-ferrous metal of the conductor enters the magnetic field sorting area, it will induce a eddy current inside the metal block. The eddy current itself will produce a magnetic field in the opposite direction of the magnetic field. The non-ferrous metal (such as copper and aluminum) will leap forward along its conveying direction due to the repulsive force of the magnetic field, thus realizing Separation with other non-metallic materials, to achieve the purpose of separation, the main area of separation effect judgment is based on the material conductivity and density ratio value of the material is easier to separate.
Components of eddy current separator
The eddy current equipment is composed of two parts: control and main body. The main part mainly consists of frame, מָנוֹעַ, distributor, separator (the core part of the equipment) permanent magnetic drum, conveyor belt, conveyor drive drum, reducer and protective cover.
Products Advantage
1. Simple operation, automatic separation of metal and non-metal; reliable single power design, making the system compact and reliable;
2. The span of separable metal particles is large, usually between 3mm and 100mm;
3. Easy to install, customized according to the customer’s needs, can be effectively connected with the new and existing assembly line;
4. Using high gradient rare earth permanent magnet system, the energy consumption is low and the maintenance is convenient;
5. According to the different turning direction of the rotor, different size materials can be sorted;
6. Various models are available (the width of the material tray can be 300 mm to 1500 מ"מ).
2. The span of separable metal particles is large, usually between 3mm and 100mm;
3. Easy to install, customized according to the customer’s needs, can be effectively connected with the new and existing assembly line;
4. Using high gradient rare earth permanent magnet system, the energy consumption is low and the maintenance is convenient;
5. According to the different turning direction of the rotor, different size materials can be sorted;
6. Various models are available (the width of the material tray can be 300 mm to 1500 מ"מ).
Model of Parameter
Eddy Current Separator Applicance
After being broken by the crusher, the municipal domestic waste, industrial waste, electronic waste, glass scraps, waste plastic doors and windows, urban wood waste, boiler bottom ash, various metal mixtures, recycling of copper, aluminum and other non-ferrous metals in the waste automobile (after being sliced by the shredder), and material treatment and sorting in the environmental protection industry.
Usage of Eddy Current Separator
1. Before using the eddy current separator, operators need to check whether the parts of the equipment are tightened completely to prevent the parts from loosening and falling off during the peeling process, which will affect the normal operation. When delivering waste metal waste to the equipment, the equipment shall be idled to make sure there is no abnormality, and then all kinds of waste shall be delivered in turn.
2. The eddy current separator of the waste metal separation equipment should pay attention to the selection of the waste metal, control the quantity well, do not suddenly more and suddenly less, and ensure that there is no such high hardness things as stones, iron blocks, so as to avoid damaging the function of the parts of the equipment.
4. By wiping, cleaning, lubricating, adjusting and other general methods, periodic nursing was carried out for the eddy current separator of waste metal separation equipment to maintain and protect the performance and technical status of the equipment.
3. When the eddy current separator of waste metal separation equipment has started to work, do not stand on the side of the equipment to avoid accidental injury.
פרטים תמונות
Eddy current separator maintenance instructions
1. Check and tidy up in time. Clean the machine at the end of each day. Check whether the screws of each part are loose or there are worn parts, such as claws and screens.
2. Fill with grease, usually install the cap oil cup on the bearing. Under normal circumstances, as long as the oil cup cover rotates 1 / 4 turn every 2 שעה (ות, the grease in the cup can be pressed into the bearing. For closed bearings, grease can be added every 300 שעה (ות. After long-term use, if the grease is replaced, clean the bearing and replace with new grease. When the equipment is working, the temperature of the bearing shall not exceed 40 ° C. If the bearing temperature continues to rise under normal operating conditions, the cause should be found and the fault resolved.
3. Carefully clean the material to be damaged. It is forbidden to mix copper, iron, lead and other metal parts, large stones and other sundries into the damage room.
מוצרים קשורים
אֲרִיזָה&משלוח
After Sales Service
Eccentric Eddy Current Separator For Sorting Waste Scraps And Flakes With Non-ferrous Metal Aluminum And Copper
♦ Pre-sale Service
(1) According to the customers’ special requirements, provide the most suitable project design, process design and the purchase program.
(2) Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.♦ On sale service
(1) Welcome you to our factory for a visiting;
(2) Accompany you to check our machine production, quality and the working conditions.
(3) Customize the equipments strictly according to your special requirements and arrange the timely delivery.♦ After-sale service
(1) Installation guidance
When the machine arrives at your company, we will dispatch our technicians to your factory to guide the installation and commissioning at site.
(2) Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety.
(3) אַחֲרָיוּת
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.
(1) According to the customers’ special requirements, provide the most suitable project design, process design and the purchase program.
(2) Guide customers to choose the best and economical plant, recover investment within short time, and site inspection.♦ On sale service
(1) Welcome you to our factory for a visiting;
(2) Accompany you to check our machine production, quality and the working conditions.
(3) Customize the equipments strictly according to your special requirements and arrange the timely delivery.♦ After-sale service
(1) Installation guidance
When the machine arrives at your company, we will dispatch our technicians to your factory to guide the installation and commissioning at site.
(2) Technical training
We provide free technical training service to your stuff. Training content contains the main work principle of machine, operating regulations, maintenance methods and steps, safety.
(3) אַחֲרָיוּת
Three guarantees of our product quality, warranty for one year (not include man-made damaged). We will maintain the machine for free for the quality problem. If the damage is caused by your improperly operation, the cost of the maintenance burden by you. we also provide you the life-long follow-up service.
הקדמת חברה
Gongyi JinLong Hengji Heavy Industry Machinery Co.. בע"מ is a comprehensive enterprise related to design, research and development, יִצוּר, marketing, technical support and installation service. We have been concentrating on waste recycling machinery, include scrap cable wire recycling machine, PCB circuit board recycling machine, waste aluminum plastic composite material aluminum plastic composite panel, medical blister, וכו) recycling machine, waste automobile/air conditioner radiator recycling machine, mixed plastics separation machine. With mature production technology and professional sales, engineers and installation team, through the unremitting technological innovation and following the market demand, we have been installed machines in more than 50countries all over the world.
שאלות נפוצות
1.About the after-sale service, how can you solve the problems that occurred of your overseas customer in time?
The warranty of our machine is normally 12 חודשים, during this period, we will arrange the international express immediately, to make sure the replacement parts to be delivered as soon as possible.
2.After placing an order, will you arrange the installation of the machine at present?
All the machines will be tested well before delivered, so most of them can be used directly, also our machine is easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be charged by you.
3.What are your terms of payment?
30% T/T מראש, 70% balance before shipment or Negotiable
The warranty of our machine is normally 12 חודשים, during this period, we will arrange the international express immediately, to make sure the replacement parts to be delivered as soon as possible.
2.After placing an order, will you arrange the installation of the machine at present?
All the machines will be tested well before delivered, so most of them can be used directly, also our machine is easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be charged by you.
3.What are your terms of payment?
30% T/T מראש, 70% balance before shipment or Negotiable
If you have another question, please feel free to contact us as below.
HOPE TO WORK WITH YOU
מידע נוסף
| איזור מוצא: | הנאן, חרסינה |
|---|---|
| שם מותג: | HJ |
| מספר דגם: | HJ-400 |
| שם מוצר: | Eddy Current Separaor |
| יישום: | Separating Copper and Aluminium |
| נוֹהָג: | Sort Recycling Material |
| Final Product: | Pure Aluminum Copper |
| שירות לאחר המכירה: | Video Technical Support |
| מתח: | 220V/380V/440V Optional |
| מְסִירָה: | 14 ימים |
| קיבולת: | 2-15T/h |
| Separation rate: | 97% |
| תעודה: | CE SGS ISO |