Factory supply big diameter dredge rubber hose
Descrizione
big diameter dredge rubber hose / flexible dredging hose
1. Inner cover with excellent abrasion resistant and high quality. Wearing colored indicator layer
2. Outer cover with excellent ageing resistance and corrosion resistance.
3. Easy installation,Good adhesion,long service life, easy assembly.
4. Flexible floating rubber dredging suction hose are used to convey silts and gravels with dredgers.
5. The thinkness of the pipe wall is from 20mm to 80mm.
6. The suitable working temperature ranges from -20°C to 80°C.
7. The large diameter is from 200mm to 1300mm.
UNpplication: Flexible floating rubber dredging suction hose are used with dredgers for silt ,gravels, porta, molo, seawater,sand conveyance and discharging flood etc.
Caratteristiche: Flexible, Anti-wave, Wear-resistance, Weather-resistance, Aging-resistance, seawater resistance
Working pressure:10−25 bar
Intervallo di temperatura: -30−+80 °C
Type of shipping: Tianjin port or Qingdao port.
Safety factor: 1:3
Technical parameters:
Hose lining: NR, SBR,BR
Reinforcement layer: tire cord with helix wire
Cover rubber layer: SBR and CR blend
Inside Diameter | Working Pressure | Burst Pressure | Vacuum Pressure | Adhesive Strength | Abrasion value | Lunghezza | ||||
mm | pollice | Mpa | sbarra | Mpa | sbarra | Mpa | sbarra | KN/m | cm3 | m |
254 | 10″ | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.0-11.8 |
400 | 16″ | 1.5 | 15 | 4.5 | 45 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.0-11.8 |
600 | 24″ | 1.2 | 12 | 3.6 | 36 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-11.8 |
1300 | 52″ | 1.2 | 12 | 3.6 | 36 | 80 | 0.8 | 1.8-2.2 | ≤0.4 | 1.5-11.8 |
We can produce the Flexible floating rubber dredging suction hose up to ID 1300mm, any other parameter can be by your requirements.
Informazioni aggiuntive
| Luogo d'origine: | Shandong, Cina |
|---|---|
| Marchio: | Great |
| Servizio di elaborazione: | Modanatura, Taglio |
| Nome del prodotto: | big diameter dredge rubber hose |
| Inner rubber: | high quality abrasion resistance synthetic rubber |
| Working pressure: | 1.0-2.5Mpa |
| Applicazione: | used for suctoin and discharge mud or water on dredger |
| Reinforcement layer: | hing tensile tire cord (suction type with helix wire or steel rings) |
| Tipo: | hydraulic dredge |
| Guarantee period: | 1 anno |
| Intervallo di temperatura: | -30°C to 80°C |
| Cover rubber: | NR,SBR blend rubber |