High Frequency Switching Power Supply
Descrizione
Relative electrical parameters of 20000A-15V power supply
Tensione di ingresso | 3-phase AC380V±10%,50HZ |
Corrente di ingresso | 506UN |
Potenza di ingresso | 333KW |
Potenza di uscita | 300KW |
Tensione di uscita | 0~15.0v |
Corrente di uscita | 0~20000UN |
Voltage Regulation | ≤±1% |
Current Regulation | ≤±1% |
Rated efficiency | ≥90% |
Power factor | ≤0.90 |
Ripple coefficient | ≥3% |
Output waveform | High frequency pulse square wave |
I/O Interface | Standard 485,4-20MA,0-10v,0-5v is opzionale (must be specified when ordering) |
Operating environment | -15~40℃ |
Temperatura di conservazione | -20~50℃ |
Resistenza di isolamento
| Ingresso – output:≥5MΩ; |
Ingresso – alloggiamento:≥5MΩ; | |
Output – housing: ≥5MΩ; | |
Insulation strength | Ingresso – output:AC1500V,10mA, one minute; |
Ingresso – alloggiamento:AC1000V,10mA, one minute; | |
Insulation class | Classe B |
Protection degree | IP20 |
Cooling system | Water-cooled |
Operating condition | 24-hour operation at full load |
Protection mode | Prompts for phase failure, overheating, overcurrent and fault protection. |
Dimensioni | Di:L1880,M700,H1750(unit:MM) |
Net Wt. | Di::750KG |
Package dimension |
|
Name of main components and parts of the water-cooled power supply
Nota: it is recommended that the positive pole be connected with two 15×200 (mm) red copper bars, and the negative pole should be connected with two 15×200 (mm) red copper bars, or multi-point connection of copper bars with cross-sectional area not less than this cross-sectional area. The connecting surface is evenly coated with conductive paste.
1 | AC380V Input cable (wire) | 2 | Power switch |
3 | Grounding rod | 4 | Output DC+ |
5 | Output DC- | 6 | Positive output connection load |
7 | Negative output connection load | 8 | Device real time state indication |
9 | Current indication | 10 | Voltage indication |
11 | Starting /Stop switch | 12 | Earthing terminal |
13 | Constant voltage/ current |
|
|
Informazioni aggiuntive
Luogo d'origine: | shanghai |
---|---|
Potenza di uscita: | 300KW |
Tipo di uscita: | Multiple |
Tensione di ingresso: | 3-phase AC380V±10%,50HZ |
Tensione di uscita: | DC 0~15.0V |
Corrente di uscita: | 0~20000A |