Double pump multifunctional Hemodialysis machines prices/ DIALYSIS machine

Techinical Specification:

-Media rail panel:
– Aluminium channel with dead zone free permeate connections.
– All connectors are heat-disinfectable and resistant for hot water.
– Single place or double place connectors available for permeate, drain water and concentrate.
– The panel includes a centralized drain column system – which is covered by the same Aluminium cover as the main panel itself, it prevent smell and noise.
– Inside the panel there is an isolation to keep the Pe-Xa loop constantly heated up while a heat disinfection process is on-going.
– Upgrades of additional connectors and extensions are easily possible because of the compact design and the flexible components.
– Ultrafiltration and Heat-disinfection
– Ultrafiltration guarantees a reliable retention of bacteria and endotoxines. The heat-disinfection enfolded the whole permeate ring-main as well as the dialysis connection pipe inclusive the inlet sector.

Apparatuur / Specificaties:
Patented procedure of Ultrafiltration of permeate
High lifetime of the ultra-filter by cross-flow-operation
Water economy by concentrate recirculation of the ultra-filter to the reverse osmosis
3-step permeate pressure valve for fully automated filling of the tank at permeate oversupply
Micro controller processed
Integrated pressure pump
Compatible for reverse osmosis systems
Hygienic

– Complete V4A-tubing, inside surface refined with clamp connectors
– PVC-free assembly of the tubing
Performance data:

– Tank volume: 500 litres, usable water quantity ca. 480 litres

– Double walled stainless steel tank (1.4404) with Isolation

– Ultrafiltration membrane made of polyether sulphone

Retention:
-Bacteria retention > 5 log step (Factor 100.000)

-Endotoxin retention > 5 log step (Factor 100.000)

-Temperature at heat disinfection > 75°C

Mechanical connections:

– Permeate input, permeate reduction reverse osmosis, permeate ring-main feed, permeate return, 3 metres pressure tube DN 20, drain HT 50 (com. to ring feeding tube connector and ring return connector)
Electrical data:
– 400 V, 3~/N, 50-60 Hz, maximaal. 14 kW
– Verwarming 12 kW, pressure pump max. 2 kW
– Dimensies / Gewicht (WxHxD): 790 x 1950 x 1450 mm / ca. 350 / 850 kg (tank empty / full)

Optioneel:
Water Protector
– Temperature sensor for measuring of temperature at the beginning of the ring
– Cutting unit for shut-off of the permeate supplying during the chemical disinfection of the reverse osmosis without opening the ring-ain.
Manufactured to MPG/MDD – System of group IIa
2.2 Central reverse osmosis unit
– All pipe work manufactured in stainless steel. Free of dead legs at the conduit and connectors which grants permeate of highest purity (purified water).

– Products graded in permeate capacity / extension class:

350 l/h, 700 l/h, 1050 l/h, 1400 l/h, 1750 l/h

– Permeate capacity each at 12°C water temperature
Upgradable by extension sets.
– For increased performances several systems can be connected in parallel.
Water inlet:
– Inlet pressure min.: min. 3 bar at 1000 l/h to 3000 l/h dynamic
– Inlet pressure max.: 6 bar static (pressure reducer in front of the system required)
Spanning:
– 230/400V 3-phase 50 Hz
– 230/400V 3-phase 60 Hz
– 115/200V 3-phase 60 Hz

– Power consumption electric: 3 kW
Used Guidelines, standards and regulations:

– Guideline of Council 93/42 EWG Medical Device Directive

– Medical electrical equipment – Part 1: General requirements for safety (IEC 601-1:1988 + A1:1991 + A2:1995)

– Safety requirements for electrical equipment for measurement, controle, and laboratory use part 1: General requirements (IEC 61010-1:2001)
Temperature sensor:
– Monitored temperature at permeate for system protection.
Optional overflow valve:
-An additional overflow valve made of stainless steel provides over-temperature protection of the ringmain and dialysis machine.
– Pressure monitoring: The following pressures are monitored:
– Permeate pressure electronic
– Inlet pressure electronic and by pressure gauge
– Pump pressure by pressure gauge
– Conductivity measurement: Plug-in conductivity sensors monitored the following conductivities:
– Softened water
– Permeate
– Fine wire fuses: Protects the control and monitoring circuits against possible overload.
– Short regeneration time (approx. 25 minuten) (DVGW approved).
– 20″ Pre-filter System for removal of medium and smaller particulate matter.
– Housing material: PP pressure resistant up to 8.6 bar
– Filter insert: 5 u m absolute cartridge
– Ball valve for soft water control and sampling.
– Frame and break tank manufactured in prickled stainless steel (AISI 304).
Pressure Pumps
Type:
-Grundfoss CRi 3-25 (50 Hz) / CRi 3-31 (60 Hz)
-Grundfoss CRi 3-17 (50 Hz) / CRi 3-21 (50 Hz)
Materiaal:
– All wetted parts in stainless steel
Type of pump:
– Vertical, normal suction pump.
– With maintenance-free sliding seals.
– Connection by hygienic clamp-connectors.
Membrane housing
-Materiaal: stainless steel AISI 316L. Matt pickled outside and inside. 4″membrane
-Membrane equipped with thin film polyamide membranes 4″
-DOW XLE-4040 – polyamide wounded – Extra Low Energy
-Retention rate of inorganic substances: > 98%
-Pipe work in stainless steel AISI 316L / AISI 316Ti. Matt pickled outside and inside.
-Ball valve in stainless steel with position permeate to ring main resp. permeate to drain for service requirements.
Main controller consisting of:
– Control board: Performs all control and monitoring functions. Self-checking on start-up
– Text display: Provides menu, guidance, displays for alarms, operating conditions and limit values.
– Keyboard: 4 button handling.
-Optional remote control controlling and monitoring from a central control room.