SENSE-WARE Universal T-229/4P Tester UV/IR Flame Detector Test Lamp with Box

The Sense-WARE® T-229/4P flame detector test lamp activates UV, IR and UV/IR flame detectors which detect in the 185-235 nm UV and 4.4 μ IR frequency ranges. For UV only detectors the maximum distance is up to 8 meter (26 ft) in the continuous mode. The test range for IR and UV/IR detectors is up to 4 meter (13 ft).

Most IR Flame detectors have an extra alarm criterion; analyzing the flicker frequency of a fire. In order to simulate the flame flicker, the lamp needs to be pulse operated. For this, the test lamp T-229/4P can be put into the pulse mode by means of a selection switch on the left side of the test lamp. The lamp then emits pulsed light with a frequency of approx. 2 Hz. After the alarm delay time the IR or UV/IR flame detector will activate.

Since shipping costs fluctuate greatly, please be sure to confirm the specific shipping costs with customer service before ordering.

Before a test is carried out make sure the flame detector is switched on and the alarm outputs are in override. Please avoid unwanted alarm signals as a result of your test.

The test lamp will turn on/off by pressing/releasing the trigger.

1. Point at the flame detector within the test distance and on the central axis of the cone of vision of the detector.

2. Press the trigger and wait until the Flame detector is activated.

3. Verify that the switch on the left of the test lamp is in the continuous mode (see figure on the RHS of this page). For the For IR or UV/IR detectors the switch on the left of the test lamp should be in the pulse mode (zien. In this mode the test lamp emits light with a pulse frequency of approx. 2 Hz.

4. Operate the test lamp for at least the selected delay time of the detector. Most flame detectors will respond within 30 seconds when the test criteria have been met.

5. Do not use the test lamp in intermittent operation or in continuous mode for longer than 1 minute.

6. Wait at least 30 seconds after each test before performing the next test.

If you need special courtesy, please click here ! VIP >>

Pakket:

Standard Package Worth Transportation.

Verzenden:

Samples could shipped by express like DHL, FEDEX, UPS, enz.

Bulk production could be shipped by sea or air.

– We will answer your question and quotation fastly
– We can control the cost and quality
– We can offer LCL service
– Good after sell service
– Accept OEM / ODM
– We are Professional Supplier with more the 20 jaren ervaring. Cooperating with us is a good choice for you.

We will offer you High Quality Products, Factory Prices, In-time Inquiry Feedback, Safe Payment and Fast Delivery.

RMS Marine Service Company Ltd. opgericht in 1993, is registered with ISSA, IMPA, and approved by ISO9001 & ISO14001.

We are capable of offering comprehensive “One-Stop” marine and offshore services: Stores/Provisions supply, Exporteren & Initial Supply, Safety Service, Engineering Service, Spare Parts & Equipment Supply, Offshore & Cruise Service, Logistics Service and General Shipping Agency.

With advantage of 9 offices (covering China, Korea and Singapore), 500 staff, 18,000sqm warehouses and over 40 long-term partners globally, RMS is committed to achieving customer satisfaction with cost-effective and high quality service.

Daarnaast, RMS has been authorized by many well-known international manufacturers as their distributor for products sales & onderhoud, for example: Cummins, Rustibus, Scott etc.

We love our customers!!! We want all the customers to be satisfied with our products so your any review with encourage us to move forward. Contact us for any question and our technincal support and after-sale team will reply in 24 uur.