1.0mm-80mm POM Delrin polyformaldehyde PP Polypropylene PA Nylon PTFE PEEK plastic ball
Descrição
1.0mm-80mm POM Delrin polyformaldehyde PP Polypropylene PA Nylon PTFE PEEK plastic ball
Plastic ball (POM)
Material | DELRIN Balls (ACETAL RESIN-POM) |
Tamanho | Φ2.381milímetros—Φ38.1milímetros |
Avaliar | G0-G3 (±0.01-0.05mm) |
Densidade | Por aí: 1.4g/cm3 |
Característica | Performance: it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption |
Formulários | POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus. |
Plastic ball (PP)
Material | Polypropylene Balls(PP) |
Tamanho | Φ2.381mm—Φ38.1milímetros |
Avaliar | G0-G3 (±0.01-0.05mm) |
Densidade | Por aí: 0.85g/cm3 |
Característica | Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator. It has a high resistance to chemical substances, such as acid, alkali, alcohol, many inorganic substances, salt solutions, solvents, gasoline, água, oil, grease, cleaning agents, fruit juices, milk and the like, but not resistant to aromatic carbon hydrogen compounds and chlorate……. |
Formulários | PP ball is mainly used for transfusion, level calibration indicator. |
Plastic ball (PA)
Material | Nylon Balls (Zytel®, Polymide–PA) |
Tamanho | Φ2.381mm—Φ38.1milímetros |
Avaliar | G0-G3 (±0.01-0.05mm) |
Densidade | Por aí: 1.1g/cm3 |
Característica | The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products. |
Formulários | Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects |
Plastic ball (PTFE)
Material | Teflon Balls-PTFE |
Tamanho | Φ2.381mm—Φ38.1milímetros |
Avaliar | G0-G3 (±0.01-0.05mm) |
Característica | Based frictionless known material having excellent chemical stability, resistance to corrosion, vedação, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of |
Formulários | Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument. |
Plastic ball (PEEK)
material | PEEK | |||||
property | High tensile | High temperature resistant | High abrasion resistant | High fatigue resistant | Environmentally friendly | Chemical stability
|
Company Images
Equipamento &Control
Pacote
May you like
Informação adicional
| Gênero: | Unissex |
|---|---|
| Faixa etária: | 14 Anos & acima |
| Material: | plástico |
| Tipo: | POM PP PA PTFE PEEK |
| Estilo: | Inflatable Toy |
| Tipo de plástico: | PP |
| Lugar de origem: | Zhejiang, China |
| Marca: | YXB |
| Número do modelo: | POM PP PA PTFE PEEK |
| Cor: | white red green blue |
| logotipo: | YXB |
| Tamanho: | 35*42*15cm |
| MOQ: | 10000PCS |
| embalagem: | 4000pcs per bag,20bags in one carton |
| sample time: | around 10days plastic ball |
| certificado: | ROHS ISO9001 |
| solid or hollow: | solid |
| usage: | bearings, rollers, valves, and electronic apparatus |