750w 1hp high torque low rpm single- phase induction ac motor
Descrição
ac motor use on slitting machine YL8024 750w
CONDITIONS
Temperatura ambiente | -15℃<0<40℃ |
Altitude | Not exceed 1000m |
Tensão nominal | 220v,110v~240v is available |
Rated frequency | 50HZ/60HZ |
Duty | S1(continuous) |
Insulation class | B,F,H |
Protection class | IP54,IP55 |
Coolong method | IC0141 |
Notice:
1.The wiring in the correct way
2.The motor should not be run idle for a long time or overload operation and blocked at low speed,so as to avoid high temperature
3.Don’t haul the motor speed so hard,so as not to snap the internal coil
4.Gear reducer have assembly well please don’t open it or reinstall it,in order to avoid the dust or gear mesh noise
5.Motor and gear reducer of the shaft in connected to the load can’t knock gravity,extrusion,lest cause internal deforma-tion and severe noise or stuck phenomenon
Product work environment:
Wide range of the speed of the motor,speed control features smooth;
Working environment:Altitude≤2500m;Temperatura ambiente:-20℃~+60℃;Relative humidity<90%,
Storage environment requirements:Humidity of the air:-5℃~+35℃,Relative hhumidity;<70%;Well ventilated,without corrosive gas.
Informação adicional
Lugar de origem: | Zhejiang, China |
---|---|
Marca: | XIUSHI |
Número do modelo: | YL8024 |
Tipo: | Asynchronous Motor |
Estágio: | Single-phase |
Certificação: | CCC, ce |
Recurso de proteção: | Totally Enclosed |
AC Voltage: | 110/ 220 V |
Efficiency: | IE 2 |
Cor: | Prata |
Material: | Aluminum shell |