High Quality Water Supply 1.0Mpa 24 inch plastic Hdpe Pipes 100Mm 160Mm Sdr 17 for sale
Descrição
You May Also like
It can be manufactured with the color striping to identify application, such as blue stripe for potable water, yellow stripe for gas applications and red stripe for mining or cable protection applications.
2. Replaceable cement pipe, iron pipe and steel pipes.
3. Fire fighting pipeline.
4. Landscaping water supply network.
5. Sewage discharge pipes.
6. Ore and mud transfers.
7. Agricultural irrigation pipe.
PE100 | 0.4MPa | 0.5MPa | 0.6MPa | 0.8MPa | 1.0MPa | 1.25MPa | 1.6MPa | 2.0MPa | 2.5MPa | ||||||||
Outside Diameter | PN4 | PN5 | PN6 | PN8 | PN10 | PN12.5 | PN16 | PN20 | PN25 | ||||||||
SDR41 | SDR33 | SDR26 | SDR21 | SDR17 | SDR13.6 | SDR11 | SDR9 | SDR7.4 | |||||||||
Wall Thickness (en) | |||||||||||||||||
20 | – | – | – | – | – | – | 2.0 | 2.3 | 3.0 | ||||||||
25 | – | – | – | – | – | 2.0 | 2.3 | 3.0 | 3.5 | ||||||||
32 | – | – | – | – | 2.0 | 2.4 | 3.0 | 3.6 | 4.4 | ||||||||
40 | – | – | – | 2.0 | 2.4 | 3.0 | 3.7 | 4.5 | 5.5 | ||||||||
50 | – | – | 2.0 | 2.4 | 3.0 | 3.7 | 4.6 | 5.6 | 6.9 | ||||||||
63 | – | – | 2.5 | 3.0 | 3.8 | 4.7 | 5.8 | 7.1 | 8.6 | ||||||||
75 | – | – | 2.9 | 3.6 | 4.5 | 5.6 | 6.8 | 8.4 | 10.3 | ||||||||
90 | – | – | 3.5 | 4.3 | 5.4 | 6.7 | 8.2 | 10.1 | 12.3 | ||||||||
110 | – | – | 4.2 | 5.3 | 6.6 | 8.1 | 10.0 | 12.3 | 15.1 | ||||||||
125 | – | – | 4.8 | 6.0 | 7.4 | 9.2 | 11.4 | 14.0 | 17.1 | ||||||||
140 | – | – | 5.4 | 6.7 | 8.3 | 10.3 | 12.7 | 15.7 | 19.2 | ||||||||
160 | – | – | 6.2 | 7.7 | 9.5 | 11.8 | 14.6 | 17.9 | 21.9 | ||||||||
180 | – | – | 6.9 | 8.6 | 10.7 | 13.3 | 16.4 | 20.1 | 24.6 | ||||||||
200 | – | – | 7.7 | 9.6 | 11.9 | 14.7 | 18.2 | 22.4 | 27.4 | ||||||||
225 | – | – | 8.6 | 10.8 | 13.4 | 16.6 | 20.5 | 25.2 | 30.8 | ||||||||
250 | – | – | 9.6 | 11.9 | 14.8 | 18.4 | 22.7 | 27.9 | 34.2 | ||||||||
280 | – | – | 10.7 | 13.4 | 16.6 | 20.6 | 25.4 | 31.3 | 38.3 | ||||||||
315 | 7.7 | 9.7 | 12.1 | 15.0 | 18.7 | 23.2 | 28.6 | 35.2 | 43.1 | ||||||||
355 | 8.7 | 10.9 | 13.6 | 16.9 | 21.1 | 26.1 | 32.2 | 39.7 | 48.5 | ||||||||
400 | 9.8 | 12.3 | 15.3 | 19.1 | 23.7 | 29.4 | 36.3 | 44.7 | 54.7 | ||||||||
450 | 11.0 | 13.8 | 17.2 | 21.5 | 26.7 | 33.1 | 40.9 | 50.3 | 61.5 | ||||||||
500 | 12.3 | 15.3 | 19.1 | 23.9 | 29.7 | 36.8 | 45.4 | 55.8 | – | ||||||||
560 | 13.7 | 17.2 | 21.4 | 26.7 | 33.2 | 41.2 | 50.8 | 62.5 | – | ||||||||
630 | 15.4 | 19.3 | 24.1 | 30.0 | 37.4 | 46.3 | 57.2 | 70.3 | – | ||||||||
710 | 17.4 | 21.8 | 27.2 | 33.9 | 42.1 | 52.2 | 64.5 | 79.3 | – | ||||||||
800 | 19.6 | 24.5 | 30.6 | 38.1 | 47.4 | 58.8 | 72.6 | 89.3 | – | ||||||||
900 | 22.0 | 27.6 | 34.4 | 42.9 | 53.3 | 66.2 | 81.7 | – | – | ||||||||
1000 | 24.5 | 30.6 | 38.2 | 47.7 | 59.3 | 72.5 | 90.2 | – | – | ||||||||
1200 | 29.4 | 36.7 | 45.9 | 57.2 | 67.9 | 88.2 | – | – | – | ||||||||
1400 | 34.3 | 42.9 | 53.5 | 66.7 | 82.4 | 102.9 | – | – | – | ||||||||
1600 | 39.2 | 49.0 | 61.2 | 76.2 | 94.1 | 117.6 | – | – | – | ||||||||
FEATUTES
2. Corrosion resistance
3. No Leakage
4. Higher flow capacity than steel pipes
CARACTERÍSTICAS
6. Lower installation costs than cement and steel pipes
7. Longevity of working life more than 50 anos
8. HDPE pipe can be recycled and environment-friendly
sdr13.6 1.5 inch poly pipe hdpe pipe pe pipe for irrigation
lubricated and not be stripped forever
cable) can be repeatedly extracted and tension in the pipe.
3). À prova d'água, damp-proof, can avoid the damage by rodent animals.
4). Aging-resistant, anti corrosion of chemicals, long service with 50 anos 5). Good weather resistant ability, and its suitable
temperature from -40°C to 100°C. 6). Convenient in construction, save time and the project cost
Butt Fusion Joint
This technique consists of simultaneously heating both the external surface of the pipe and the internal surface of the socket
fitting until the material reaches fusion temperature; inspecting the melt pattern; inserting the pipe end into the socket; e
holding it in place until the joint cools.Mechanical equipment is available and should be used for sizes larger than 2 polegada
diameter to attain the increased force required and to assist in alignment.
Follow these general steps when performing socket fusion:
1.Select the equipment
2.Square and prepare the pipe ends
3.Heat the parts
4.Join the parts
5.Allow to cool
Socket Fusion Joint
This technique consists of simultaneously heating both the external surface of the pipe and the internal surface of the socket
fitting until the material reaches fusion temperature; inspecting the melt pattern; inserting the pipe end into the socket; e
holding it in place until the joint cools.Mechanical equipment is available and should be used for sizes larger than 2 polegada
diameter to attain the increased force required and to assist in alignment.
Follow these general steps when performing socket fusion:
1.Select the equipment
2.Square and prepare the pipe ends
3.Heat the parts
4.Join the parts
5.Allow to cool
Electro Fusion Joint
This technique of heat fusion joining is somewhat different from the conventional fusion joining.The main difference between
conventional heat fusion and electro fusion is the method by which the heat is applied. In conventional heat fusion joining, uma
heating tool is used to heat the pipe and fitting surfaces.The electro fusion joint is heated internally,either by a wire coil at
the interface of the joint or, as in one design, by a conductive polymer.Heat is created as an electric current is applied to the
conductive material in the fitting.
General steps to be followed when performing electro fusion joining are:
1.Prepare the pipes
2.Clamp the fittings and pipe(s)
3.Apply the electric current
4.Cold and remove the clamps
HDPE Fittings for Connection:
CONTACT
sdr13.6 1.5 inch poly pipe hdpe pipe pe pipe for irrigation
Q1. Você é uma empresa comercial ou fabricante ?
UMA: We are professional manufacturer and welcome to your visit at any time.
Q2. Quanto tempo é o seu tempo de entrega?
UMA: Generally it takes 5-10 days if the goods are in stock,which is depends on your quantity and can be negotiable.
Q3. Você fornece amostras ?
UMA: Sim,of course sample is avaliable and for small quantity we can supply for free.
Q4.What is your terms of payment ?
UMA: L/C,Western Union,T/T30% in advance ,balance before shippment and so on.
Q5. For pipe fittings, what do you do mainly?
UMA: For fittings, coupling (socket), elbows, tee, reducer, union, valve, cap some electrofusion fittings and compression fittings.
Q6.Can I have my own Logo on the product?
UMA: Sim, sure,you just send us your drawing,we’ll make logo for you and before production we will confirm with you in advance.
Q7.Can I request to change the method of packaging and transportation?
UMA: Sim, the packaging and transportation can be made as per your requirements.
Informação adicional
| Lugar de origem: | Hebei, China |
|---|---|
| Marca: | DRD/OEM |
| Número do modelo: | HDPE 16-1800 |
| Material: | PE100 |
| Especificação: | DN16-1800 |
| Comprimento: | 5.9M 11.9M As required |
| Espessura: | 2.0-117.6milímetros |
| Padrão: | ISO4427 AS/NZS4130/DIN8074/EN12201/GOST18599 |
| Processing Service: | Moulding, Corte |
| Nome do Produto: | 300milímetros 10 12 Inch HDPE Drain Pipe Per Foot Meter Prices List For Water |
| Tamanho: | Sdr7.4/sdr 9/sdr/11/sdr13.6/sdr17 |
| Temperatura: | -50° ~ 50° |
| Working pressure: | PN4/PN5/PN6/PN8/PN10/PN12.5/PN16/PN20/PN25/PN30 |
| Connection: | Butt Fusion/Socket Fusion |
| Application field: | Industry Agriculture/Water supply and Drainage |
| Certificado: | ISO4427/ISO9001.ISO14001/ISO18001 |
| tamanho2: | 2.5Mpa/2.0mpa/1.6mpa/1.25mpa/1.0mpa/0.8mpa |
| Embalagem: | In rolls, 5.8m length, 11.9m/length |
| cor: | Black/blue/yellow/red or according to client's requirement |