Horizontal diesel log portable band sawmill for log

Modelo

RS22G

RS26G

RS31G

RS22E

RS26E

RS31E

Poder

Gasoline 7HP

(LIFAN, Manual start)

Gasoline 9HP

(LIFAN, Manual start)

Gasoline 15HP

(LIFAN, Manual start)

Electric Motor

5.5KW

Electric Motor

7.5KW

Deslocamento

212cc

301cc

420cc

400V 50HZ 3phase

Cutting capacity

559*155 *2794milímetros (22”*6”*110”)

660*178*2794milímetros

(26”*7”*110”)

790*178*2794milímetros

(31”*7”*110”)

559*155*2794milímetros (22”*6”*110”)

660*178*2794milímetros (26”*7”*110”)

790*178*2794milímetros

(31”*7”*110”)

Frame

2peças

4peças

4peças

2peças

4peças

4peças

Blade size

3251*34*0.9milímetros (128”*1-1/4”*0.035”)

3670*34*0.9milímetros

(144”*1-1/4”*0.035”)

3670*34*0.9milímetros

(144”*1-1/4”*0.035”)

3251*34*0.9 milímetros (128”*1.25”*0.035”)

3670*34*0.9 milímetros (144”*1.25”*0.035”)

3670*34*0.9milímetros

(144”*1-1/4”*0.035”)

Safe cutting Speed

13-15s/m

13-15s/m

Blade speed

17m/min

17m/min

Distance teeth

22milímetros (0.86”)

22milímetros (0.86”)

Blade Wheel Dia.

475 milímetros (18.7”)

475 milímetros (18.7”)

Dimensão

4064*1778*1800milímetros (160”*70”*71”)

4064*1778*1800milímetros (160”*70”*71”)

Track size

4042x900mm(159”x35.4”)

4042x900mm(159”x35.4”)

Embalagem

P1: 1800*550*810milímetros, P2: 2000*140*95milímetros

P1: 1800*550*810milímetros, P2: 2000*140*95milímetros

Peso

312/344kg

352/380kg

20”/40”HC

39pcs/78pcs

39pcs/71pcs

General Construction

All major steel components feature either a powder coated or galvanized steel finish. This ensures your mill will stand up to nature’s elements. We recommend covering your mill when not in use, but if you forget, it’s good to know the mill will endure nature. The head moves up and down along galvanized steel channel via a very easy to turn hand crank system. The blade is kept lubricated by utilizing a water drip system. This prevents sap from gumming up your blade.

Corte

The mill is capable of cutting 22″ (55cm) diameter logs up to 10′ 4″ (3.1m) long. Extra track sections are available in 6′ 5″ (1.95m) increments. Capable of squaring cants at 16″ (40cm) or live edge boards at 18″ (45cm) wide. It can also skim veneers at as thin as 1/16″ (1.6milímetros). The HM122 will cut within 1″ (25milímetros) of the deck ensuring that you maximize your usable board foot output.

Poder

Our mills are powered by a 7.0 HP 4-cycle LIFAN(Kohler, B&S) gas/petrol engine. It features a slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty. Attached to the engine is an industrial centrifugal clutch system which offers “gas and go” efficiency and ease.

Track System

The head of our sawmill rolls along rigid 2.5″ x 2.5″ (6cm x 6cm) “eu” channel which is cross supported with heavy duty 2 3/8″ x 4 3/4″ (6cm x 12cm) rectangle log bunks. These heavy duty cross supports also provide additional rigidity to the track system. The track also features one easy to use adjustable log clamp to securely hold the log while milling. The track itself consists of two 6′ 5″ (1.95m) sections allowing for 10′ 5″ (3.1m) log lengths. Additional 6′ 5″ (1.95m) tracks may be attached to accommodate logs of any length.