Machine Tools Accessories 90 degree angle head for CNC BT30 BT40 BT50 CAT30 CAT40 CAT50 SK30 SK40 SK50 FMB22 FMB27 FMB32 ER16 ER25 ER32 ER40 ER50 angle head CNC angle headBT40 angle head with coolant 90 degree angle head angle head
Angle head with coolant
ماركة: OLICNC
بحجم :AG90-ER25-60
قوة: 1.5كو
سرعة:4500دورة في الدقيقة
Maximum pressure: 1.0MP
OEM customization: support
طلب عينة: متوفرة
Avalible: SK/CAT/BT/KM/ISO/HSK
Chip fluid can cool the body at the same time
Four unique advantages make good products
● Japanese high-precision angular contact ball bearings
● Germany high precision sector gear
● The unique sealed structure is more
effective in preventing dust and water ● Corresponds to the tip oiling angle.
!!!All angle heads have passed precision test and rotation test.
TIR: 0.005mm at holder nose and 0.008mm at 4d
معلمات المنتج
نموذج
انتاج |
L1
L2
L3
قوة
Maximum speed
Maximum torque
Reduction ratio
AG90- ER16-60
ER16
41/48
65/80
60
1.5كيلوواط
4500دورة في الدقيقة
1 2NM
1:1
AG90-ER16-120
ER16
41/48
65/80
120
1.5كيلوواط
4500دورة في الدقيقة
1 2NM
1:1
AG90-ER16-180
ER16
41/48
65/80
180
1.5كيلوواط
4500دورة في الدقيقة
1 2NM
1:1
More size information please contact us.
Buy Angle HeadGift Positioning Block
Please provide your spindle parameters.
تفاصيل الصور
Precautions for using angle milling head
1. Check whether the weight of the angle milling head meets the requirements of the machine tool magazine Weight requirements. (If it does not meet the recommended manual installation angle milling head) 2. Check the tightening of the angle milling head before the completion of installation and processing Whether the bolts are loose. 3. Check whether the positioning pin of the angle milling head fits tightly with the groove of the fixing block solid. 4. Check whether the limit pin is completely separated from the positioning ring before use. 5. Do not use angle milling head for continuous processing for a long time, it is recommended to process 2 Shut down for 5 minutes after two hours to prevent the internal bearing teeth of the angle head Overheating of internal parts such as wheels. (If you need to add It is recommended to purchase multiple angle milling heads for replacement.) 6. Need to inject a little lubricating grease with an oil gun every week to lubricate the teeth 7. Anti-rust treatment is required when the angle milling head is not used. 8. It is strictly forbidden to use a speed exceeding the maximum speed range of the angle milling head, عمومًا, the maximum speed is within 70%, and the maximum speed can be used in a short time Rotating speed. 9. It is strictly forbidden to vigorously strike the angle milling head shell to prevent internal bearing teeth Parts such as wheels will be broken. 10. When using an angle milling head, the input shank and output cone must be maintained Cleanliness. 11. Bottom pad before installation. One cushion pad to prevent angle milling head Falling hurts.
Our Package
منتجات ذات صله
التعبئة&شحن
الشهادات
Our company
OLICNC®came into the line of Machine Tool Accessories in 1988, OLICNC®was legally registered in 2004; Bought land at No. 9 Quanxin Rd., Sishui Economic Developing Zone, جيننج, Shandong in 2007 and built new factory on it, occupies an area of 15320㎡, workshops and office building are over 11000㎡. NowOLICNC®consists of related
technology, processing, trading and service, as a professional company to serve for our clients, employees and society entirely.
OLICNC®mainly manufactures Tool Holders for machine tools & Components for wood-working machines, as well as local Machine مُكَمِّلات, belongs to the line of Machine & Tools. OLICNC®main products are necessary Tool Holders in lathing, طحن, حفر, grinding, boring, planning, CNC Machines or Machine Centers, including variety of Spring Collets, Collets Chuck Sets, مطحنة حوامل, Tapping Collets, Rough or Precision Boring Heads, Drill Chucks, Live Centers and so on. Meanwhile, OLICNC®can alsosupply Machine Accessories like Lathe Chucks,
Steel Clamping Kits,Machine Vises, Bench Vises, Dividing Heads, Rotary Tables and Magnetic Chucks., إلخ. Additional HSS Thread Tools and Tool Bits can be supplied. All these items fromOLICNC®are in series of different common sizes; Besides above exiting ones, OLICNC®can also make and supply the goods as delivered samples of drawings.our company website: www.olimachine.com Shandong Sishui OLI Machine Co., Ltd Add.: No.9 Quanxin Rd. Sishui Economic Developing Zone, جيننج, شاندونغ, China Tel: ++86-537-4252090 MP:+8615163782196 فاكس:++86-537-4255482 TradeManager:cn1510666465
