Hot Sell Lockseam corrugated metal sheet roof solar PV panel mounting bracket L feet L foot kit
وصف
تخصيص
Hot Sell Lockseam corrugated metal sheet roof solar PV panel mounting bracket L feet L foot kit
اسم المنتج | Hot Sell Lockseam corrugated metal sheet roof solar PV panel mounting bracket L feet L foot kit |
رقم الموديل | Null |
مادة | Aluminum 6005-T5 & SUS 304 ستانلس ستيل |
بحجم | 50*80سم |
Max Wind Speed | يصل إلى 60 m/s (214KM/H) |
Snow Load | Up to 1.4KN/M2 |
طلب | Corrugated Metal Sheet Roof |
ضمان | 10 سنوات |
Service Life | 25 سنوات |
شهادة | ISO9001/ CE/ SGS etc. |
اساسي | AS/NZS 1170 |
Installation Detail
Drill a hole in the right position as planned, install the EPDM rubber and L-bracket, then screw the bolt into the wooden beam below.
Section of L-bracket after installation. Please be careful during installation, not destroy the steel below.
Mount the clamp and L-shaped bracket to the roof rail. confirm and tighten the bolts. Both rails must be on the same level.
The module is secured to the roof rail by end clamps. As shown on the right. أولاً, the panel is placed flat on the rail, then the rail clip is snapped into the rail slot and finally the end clamp kit is installed.
Portrait solar panel, Solar panel Length(should check the solar panel install instruction). Landscape solar panel, solar panel width.
العنوان هنا.
L-bracket horizontal spacing can be up to 2m. إل- bracket upward spacing is about 1/2 or 3/4 the length of solar panel. Spacing between solar panel:18مم.
Project Case
الشهادات
ملف الشركة
Production Process
معرض
Product Categories
التعليمات
معلومة اضافية
ضمان: | 10سنين, 10 سنوات |
---|---|
شهادة: | ISO9001/CE |
مكان المنشأ: | فوجيان, الصين |
اسم العلامة التجارية: | Kseng |
رقم الموديل: | Null |
اسم المنتج: | L foot roof mounting |
طلب: | corrugated metal sheet roof |
مادة: | Aluminum 6005-T5 |
اللون: | Natural |
شهادة: | ISO 9001/CE |
Service life: | 25 سنوات |
بحجم: | 80*50cm/ 50*50cm/custom |
اساسي: | AS/NZ1170 |
Snow load: | 1.4 KN/m2 |