1. Sample customization We will produce according to your requirements, and we need you to provide the following information un. Sample supply b. Product demand: product tonality, Taille, section number, gram weight and price
2. R & D customization un. Painting requirements b. Product demand: product tonality, Taille, section number, gram weight and price
Standard
Metric System, British System
Diameter mm
Usually 5~300mm, the larger diameter need to check with engineers.
Diameter tolerance
±0.1mm
Épaisseur
0-10millimètre, Personnalisé
Longueur
5mm~3m
Traitement de surface
mat / brillant
Maximum tolerable temperature
– 30 – + 180 C
Carbon fiber material
3K, 6K, 12K (according to customer requirements)
Rolling and wrapping
According to the customer’s requirements to set the carbon fiber material layer ratio
The directions of Rolling and wrapping carbon fiber
According to the customer’s performance requirements for different products, engineers can design the main structure of the product through mechanical performance simulation in the process of structural design to achieve the best performance.
Water absorption
0.66﹪
Densité
1.78g/cm3
Stiffness
Calculated value after test according to customer requirements
Bending strength
Calculated value after test according to customer requirements
Tensile strength
3500MPa
The detection and inspection test methods in the production process and after the production
In the production process, each section uses special testing instruments for dimensional inspection. After the completion of production, the quality control carries out full inspection according to the drawing dimensions
