Vente!

IE4 motor super efficiency three phase synchronous reluctance motor system explosion proof motor

La description

IE4 motor super efficiency three phase synchronous reluctance motor system explosion proof motor

Description du produit
HMSRM series IE4 Synchronous Reluctance Technology

Brief introduction of IE4 moteur

The HMSRM series Synchronous Reluctance (SR) motors driven by variable speed inverters have been recently introduced in the Industrial market. They are capable to achieve very high efficiency level and to gain the maximum efficiency class (IE4) of IEC 60034-30 la norme.
Compare items
Permanent magnet
asynchronous
Synchronous reluctance
effectiveness
high
general
high
Power factor
high
Higher
general
Speed ​​regulation performance
better
general
it is good
Mechanical properties
hard
doux
hard
fiabilité
general
high
high
Environmental adaptability
general
it is good
it is good
Processing technology
complex
general
general
Motor cost
high
general
general
Drive cost
Consistent
Consistent
Consistent
The characteristics of such design are:
1)The rotor is cageless;

2)The resulting SR motor is brushless and magnet-free;
3)Only the rotor design changes in relation to an IEC standard motor and therefore it can be derived from standard Induction
Machines, simply by removing rotor bars and introducing saliency to the rotor.
The inherent advantages of HMSRM motor technology are:
1. Rotor synchronicity, granting a more accurate speed control (no rotor slip);
2. Cage-less rotor means no rotor conductors for:

un. Increased robustness;
b. Lower maintenance/cost;
c. Thermal improvements;
3. Higher efficiency, up to 94%;
4. Higher torque density;
5. Lower rotor inertia means faster torque dynamics.

Avantages:

HMSRM series motors are characterized by high efficiency, large starting torque, wide speed range, and low noise and vibration. The motor contains no permanent magnetic material, and there is no risk of demagnetization, which is stable and reliable. It can be used to drive a variety of general mechanical equipment, such as fans, water pumps, compresseurs, etc., to meet the needs of equipment transmission in various industrial automation fields such as machine tools, petroleum, chimique, paper, textile, et ainsi de suite.
The frame of HMSRM series motors adopts the same casing as standard small and medium-sized asynchronous motors, which can realize seamless replacement with traditional low-efficiency asynchronous motors.

Full Function

Cover multiple control methods (la rapidité, torque, position)
No slip at synchronous speed, excellent speed regulation performance
High Efficiency
Meets IE3 / IE4 Energy Efficiency Rating
No risk of demagnetization, continuous and stable energy efficiency
Super Economic
No permanent magnet material, low material cost
Simple and reliable structure, low maintenance cost
Same frame size as asynchronous motor, seamlessly replaceable

Brief introduction of inverter
HM series inverter
HM series inverter is a general-purpose inverter with high-performance vector control algorithm. It can achieve high-performance and high-precision motor speed control. It can be widely used for driving induction motors, permanent magnet synchronous motors, and synchronous reluctance motors. .
HM series inverter integrates a variety of control methods, for the technology and performance encountered in cables, machine tools, metal products, petrochemicals, natural gas, lifting equipment, pulp and paper, textile, impression et teinture, ceramics and other industrial equipment The above problems can be easily solved.
project
specification
Control performance
Frequency control range
0~600Hz
Output frequency accuracy
0.01hertz
Set frequency resolution
Digital setting: 0.01hertz
Analog setting: ad conversion accuracy is one thousandth.
Speed ​​range
1:100
Overload capability
G type machine: 150% rated current 60s; 180% rated current 2s.
P type machine: 120% rated current 60s; 150% rated current 2s.
way to control
Open loop / closed loop vector control.
Torque boost
Manual torque adjustable; automatic full frequency range torque boost.
Functional description
Acceleration curve
Linear or S-curve acceleration and deceleration; four acceleration and deceleration times; 0.1~3200.0s continuously adjustable
Jog function
Jog frequency: 0.00~50.00hz; jog acceleration and deceleration: 0.1~3200.0s continuously adjustable
Standard function
Motor parameter automatic detection function, high performance vector control, multi-point vf curve, manual torque boost,
automatic torque boost, automatic slip compensation (speed compensation), automatic stable output voltage (avr), speed tracking
start function, start DC Braking, parking DC braking, instantaneous power failure restart, automatic fault reset, overcurrent
suppression during acceleration, overcurrent down frequency reduction function at constant speed, overvoltage suppression during
deceleration, skip frequency function, automatic adjustment of carrier frequency, automatic energy saving operation Simple
one-to-two water supply function, 16-segment multi-speed operation, simple plc program operation, textile swing frequency
function, closed-loop pid adjustment control
Run command channel
3 control modes: keyboard control, analog terminal control, serial communication control
Frequency source selection
Digital setting, analog voltage setting, analog current setting, pulse input setting, serial communication port setting;
Can be combined in a variety of ways to switch
Input terminal
8 digital input terminals with up to 27 custom functions compatible with active pnp input or npn input, one of which can be used
as a high speed pulse input;
2 analog input terminals, one of which only receives voltage signal (0 ~ 10V), and the other can receive voltage signal (0 ~ 10V)
and current signal (0 ~ 20mA);
Output terminal
2 open collector outputs with up to 16 custom functions;
1 relay output with up to 27 custom functions;
2 analog outputs with up to 8 custom functions; can output voltage signals (0 ~ 10V) or current signals (0 ~ 20mA);
Protective function
Overvoltage, undervoltage, external fault, overcurrent, overheat, overload
Environnement d'exploitation
Installation place
Intérieur, below 1 km above sea level, no dust, no corrosive gas and no direct sunlight
Température ambiante
-10°C~+40 °C (the ambient temperature is higher than 40°C, please derate)
humidity
20%~90%rh (pas de condensation)
vibration
Less than 0.5g
Storage temperature
-25℃~+65 ℃
Application
Profil de la société

Large scale with sufficient capacity

CAPITAL —— 68 MILLION RMB ANNUAL CAPACITY —— 600,000 SETS

ESTABLISHED YEAR —— 1992(Plus de 35 années) Location —— 150KM AWAY FROM SHANGHAI
MODERN EQUIPMENT
* TWO SETS OF HIGH SPEED STAMPING MACHINES
* FOUR LINES OF AUTO WINDING (71-132 FRAME)
* VACUUM PRESSURE IMPREGNATION
* THREE LINES OF SEMI-AUTO ASSEMBLE (63-112 FRAME)
* ROTOR CAST ALUMINUM EQUIPMENT
* TYPE TEST STATION

ADVANCED MANAGEMENT
* KINGDEE ERP ( BOM MANAGEMENT, EFFICIENCT INFORMATION AND PRODUCT FLOW)
* 7S MANAGEMENT ( NEAT SITE, QUALITIFIED WORKERS)

FAQ
Q: Have you done mess production of synchronous reluctance motor?

UN: Oui. And mainly 4 poles, 11-200kW.
Q: Is the inverter developed and supplied by your company?
UN: Oui. We have the core technology.
Q: Could we be your agent of this IE4 synchronous reluctance motor?
UN: Oui. We invite you to visit our factory to check our capacity and we could negotiate further.
Presales service——Provide technical guidane of choosing the right model.
Payment terms——Support Alibaba online order with trade assurrance by Alibaba. T/T or L/C.
After-sales service——If you have any doubts about motor usage, welcome to send us feedback.
Loading port——Shanghai or Zhangjiagang Port, Chine.
Recommander des produits

L'emballage du produit

Informations Complémentaires

garantie:

3années

Lieu d'origine:

Jiangsu, Chine

Marque:

NFM

Numéro de modèle:

HMSRM

Taper:

Synchronous Motor

La fréquence:

0-600hertz

Phase:

Three-phase

Certificat:

CCC, ce

Fonction de protection:

Totalement fermé

Tension CA:

380V

Efficacité:

C'EST À DIRE 4

Nom du produit:

synchronous reluctance motor

Eff:

IE4

Mounting:

B3 B5 B35

Body:

Iron/Aluminum

Concevoir:

synchronous reluctance

Protection class:

IP54/IP55/IP56/IP65