HGM6120Useries automatic controller, integrating digital, intelligent and network techniques, הוא used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, אנגלית, ספרדית, רוּסִי, פורטוגזית, Turkish, Polish and French with easy and reliable operation.
HGM6120Useries automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use or RS485 interface to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.
performance and feature
תכונה
132*64 LCD display with backlight, optional language interface (סינית פשוטה, אנגלית, ספרדית, רוּסִי, פורטוגזית, Turkish, Polish and French), push-button operation; Acrylic screen, improved wearable and scratch resistance property; Silica-gel panel and keys can well adapt to higher and lower temperature; With double RS485 communication ports, can achieve “three remote” functions via MODBUS protocol; Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system; Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;cy, power parameter of mains/gens;.
performance
HGM6120U: Based on HGM6110U, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.
פרמטרי מוצר
מתח עבודה
DC8.0V to DC35.0V, continuous power supply
צריכת חשמל
<3W(Standby mode: ≤2W
AC System
3P4W
3P3W
1P2W
2P3W
AC15V – AC360 V (ph-N)
AC30V – AC620 V (ph-ph)
AC15V – AC360 V (ph-N)
AC15V – AC360 V (ph-N)
AC Alternator Frequency
50Hz/60Hz
Rotate speed sensor Voltage
1.0V to 24V (RMS)
Rotate speed sensor Frequency
10,000 הרץ (max.)
Start Relay Output
16 A DC28V at supply voltage
Fuel Relay Output
16 A DC28V at supply voltage
Programmable Relay Output 1
7 A DC28V at supply voltage
Programmable Relay Output 2
7 A 250VAC volt-free output
Programmable Relay Output 3
16 Amp 250VAC volt-free output
Programmable Relay Output 4
16 A 250VAC volt-free output
Panel Cutout
186mm x 141mm
C.T. Secondary Current
5א (rated)
OVERALL DIMENSION AND PANEL CUTOUT
Installation Instructions
INSTALLATION
1) Withdraw the fixing clip screw (turn anticlockwise) until it reaches proper position.
2) Pull the fixing clip backwards (towards the back of the module) ensuring four clips are inside their allotted slots.
3) Turn the fixing clip screws clockwise until they make contact with the panel. הערה: Care should be taken not to over tighten the screws of fixing clips.
The module of this figure is 6110U, and the product effect is the same as 6120U
The module of this figure is 6110U, and the product effect is the same as 6120U
מדוע לבחור בנו
Wuxi Elijah electronic technology Co., LTD mainly produces generator controller, generator set charger, generator set control cabinet, dual power switch, diesel engine speed regulating plate, actuator, electric throttle and flameout and other high-tech enterprises. לאחר 8 years of hard work, it has become a strong and innovative company integrating scientific research, הפקה, מכירות ושירות. החברה נוסדה ב 2012, ten years of accumulation, eight years of practice, we understand that quality is the life of the enterprise, science and technology is the first productivity. We based in Wuxi, Jiangsu province to wards the country, rushed to the world! Our company’s service concept is to constantly exceed, the pursuit of perfection; Integrity, innovation as the soul; In times of peace, be prepared for adversity.
Enterprise philosophy, the power of harmonious birth;
Enterprise value achievement customer, happy oneself!
