Anti slip aluminium stair nosing uk for stairs

Anti slip aluminium stair nosing uk for stairs

Longest Wearing: Stair nosings shown here ensure anti-slip protection for pedestrians. They also prevent wear and deterioration at the front edge of each step, greatly extending the life of the stairway.

Impact Resistant: Cast nosings are manufactured with the alloys that create highly impact-resistant treads to withstand heavy traffic on interior and exterior stairways.

Barrier-Free: These stair nosings are in full compliance with the Barrier-Free Code for all stairways. They offer a solid anti-slip surface and a gently radiused front edge with no projection beyond the riser.

Anti-Slip Surface: Maximum protection against slipping accidents is established through the proper blend of abrasive granules permanently embedded in the exposed walking surface.

Economical: Our advanced manufacturing equipment and special American Safety Tread molding process assure the lowest cost per unit.

(1) Block off access to the stairway you will be working on to keep people out of the area. Put up signs and danger tape;

(2) Begin at bottom stair. Carefully lay stair tread upside down on the stair;

(3) Apply a ¼” bead of glue all the way around the perimeter of the bottom side of the tread, keeping approximately ¾” away from the outside edge of tread.

Apply an additional ¼” bead in a wavy pattern on the remainder of the bottom side of the tread inside the perimeter bead, as well as a ¼” bead around each predrilled hole approximately ½” from the hole.

(4) Carefully pick up, turn over and place tread on stair;

(5) Push down on tread to distribute glue or caulk;

(6) Be sure ends of tread are equally spaced on stair and that tread is pushed back as far as it will go against front edge;

(7) Using a shop vacuum, hold end of vacuum hose as close as possible to the predrilled hole(ס) in the tread in order to vacuum up dust and drillings from hole and tread;

(8) Carefully drill the first hole toward the center of the tread;

(9) Vacuum out all dust and debris from hole;

(10) Screw in and tighten anchor. זְהִירוּת: Using a power driver can strip the fastener. If you use a power driver, use the clutch to help prevent stripping;

(11) Drill and anchor another hole on either end of the tread;

(12) Drill all remaining holes and anchor them;

(13) Repeat the process for remaining stair treads

• Safety package, Three steps of packages,pearl cotton,carton and plywood for the transportation
  
• 100% test before delivering stair nosing(ensure the quality)
• Item shipped in about 15 working days against payment depends on the quantity
• Tracking number will be sent to you as soon as we ship the products

נְקִישָׁה “לִשְׁלוֹחַ” below for more details on price, delivery, samples…….