LNG Dispenser for liquified Natural Gas lng dispenser

What is LNG?

LNG is liquefied natural gas, a clear, colourless, non-toxic liquid that forms when natural gas is cooled to -162ºג (-260ºו). This shrinks the volume of the gas 600 פִּי, making it easier to store and ship to energy-hungry towns and cities overseas

LNG DISPENSER, RT-LNG112, is designed to fill the LNG or biogas to LNG vehicles in gas station.

מפרטים:
* מימד חיצוני: 2200× 1080× 580mm

* Ambient Temperature: -40o C~+55o C
* לחות: ≤ 95%
* Max Flow: 50kg/m

* דיוק: ± 0.10%
* Repeating Accuracy: ≤ 0.15%
* Working pressure:20Mpa

* Max pressure:25Mpa

* כּוֹחַ: AC110V± 20%, AC220V± 20%, AC380V± 20% (50הרץ)
* רַעַשׁ: ≤ 70dB(כיתה)
* Unit price range: 0~9999, 0~999999 (changeable)
* Single range: 1~9999.99, 1~999999.99(changeable)
* Accumulative range: 0~9999999999.99
* Electronic Calibration.
* Voice and printer (option).
* Fueling times limit function.
* Function of locking pump.
* Stop fueling by integer sale.
* Can set the decimal point for the display, so can be used in many country with different currency rate.
* Leaves the communication ports, so it can Communicate with the gas station management system.
* Can communicate with the IC card reader.

Dispenser ID Meaning

• יישומים: Refueling of LNG vehicles
• Compatible gases:Liquefied natural gas or biogas
• Type of LNGor LBG:Cold (3 בָּר) and saturated (6/8 בָּר) LNG
• מקסימום. flow:170 l/min / 45 GPM
• מקסימום. service pressure:עד ל 20 בָּר / 290psi
• Weights and measurescertifications:MID (אֵירוֹפָּה)
• Power requirements:24VDC, and 230VAC (for heaters)

Testing Procedure:

Each dispenser is electrically and mechanically pre-tested. On site performance test validates that the process performances of the refuelling stations are met.

איכות
ISO 9001+ ISO 14001, ATEX (ref),IECEX,

תכונות

High accuracy measurement (99,5% trough CORIOLIS flow meter) and possibility of weights and measures approval of the dispenser

Fully equipped with fuelling and venting hoses, nozzles,and break-away systems

Fully automatic vehicle boil-off gas recovery line ensuring close to zero venting to atmosphere

Refuelling is achieved either by low flow signal, or high pressure. Thus ensuring double safety against over fuelling

Heated nozzle receptacles ensuring minimum ice building when extensive use is required

High safety level ensuring easy and safe operation

• Collector for safety valves redirected to the station storage tank
• Grounding of the entire dispenser and the vehicle tank during fuelling
• Use of explosion proof equipments for zone 1/Division I enclosure
• Special insulated flexible hoses in order to avoid cold burning for the operator
• The dispenser is designed following strongest safety regulation such as Atex, IECEx, NFPA, or UL codes
• Integrated air instrument purge gun in order to clean the nozzle before connection
• Digital display with total price, total volume, and price per Kg indication
• The dispenser electronics is ready to be connected to a payment system. Different communication protocols are available
• Possibility to chose between cold and saturated fuel and single or dual hose operation
• Easy operation which requires minimum training for user
• Specific PLC technology allowing remote maintenance and trouble shooting by Realtech support team

Options

Weights and measures approved dispenser (MID, NTEP on demand, NMI)

• Single or dual hose dispenser
• Cold and saturated fuel refuelling management
• Heated receptacles
• Different type of refuelling nozzles available (Parker Kodiak, J.C Carter, Macrotech)
• Possibility to customize the dispenser according to specific requirement
• IC CARD management system
• IFID card management system
• Bank Card management system