UV Curing fiberfix repair patch
Descrizione
The Fiberglass Fix Tape is great for flat surface repairs and contains a special resin in the patch that cures by UV light. To apply,simply remove black plastic, place on desired surface, apply sunlight/UV light, once it is hardened remove the clear plastic and you’re done!
Waterproof material
Built-in double bladder
Hardens Like FRP Steel
FiberFix Rigid Tape is the other cousin of the Repair Wrap- a fiberglass patch for permanent repairs on flat or hard-to-wrap
surfaces. Simply apply the patch over the hole and expose to sunlight or UV light (but don’t expose before applying!).
Q&UN
* What’s Included?: One 3″x6″ patch, One 9″x12″ patch, One 8x12CM patch
* Cure Time: 5-10 minuti (depending on amount of sunlight/UV exposure)
* What Surfaces Will It Work On?: Any rigid surface (will not work on flexible surfaces such as fabrics or highly bendable
plastica)
* Sandable/Paintable?: sì!
Applicazioni: Rain gutters, fences, garbage barrels, water tanks, boats, canoes, automotive body, and much more!
FiberFix Repair Patch combines industrial-strength fiber and specialized resin into a wrap that hardens like steel and provides a permanent fix. Simply dip the wrap in water to activate the resin, wrap around what you need to fix, e 10 minutes later it is cured!
* Cure Time: 2-5 minuti (good Sunlight will faster the cure)
* Water Pressure Rating: Fino a 60 PSI
* Temperature Rating: Between -30° F and 300° F
* Sandable & Paintable?: sì!
Applicazioni: Water pipes, garden and shop tools, furniture frames, hoses, outdoor gear, camping equipment, sporting equipment…and much more!
UN. 2 anni.
Q. How long does it take to cure in sunlight?
UN. less than 5 minutes in sunny , less than 20 minutes in cloudy.
Q. How long does it take to cure under UV lighting?
UN. 2 minuti.
Q. Will it stick to any surface?
UN. sì, except for polypropylene.
Q. Can patch be cut to any one size?
UN. sì.
Q. Can patch be returned back to original pouch?
UN. sì.
Q. What is the shelf life of opened pouch?
UN. 1 hour. Avoid sunshine.
Q. Is patch chemically inert?
UN. sì.
Q. Can patch be drilled, sanded or painted?
UN. sì.
Q. Can patch be used on wet surfaces?
UN. Not recommended.
Q Is preparation of surface required?
UN. sì, clean surface is required. A little bit rust can also works.
Q. What is the temperature range after cured?
UN. Bassa temperatura：-70℃ Moist heat：80-120℃ Dry heat：180-220℃
Q. What sizes are patches available?
UN. 8*12CM or 9″ x l2″.or customized.
Q. Is uncured patch flammable?
UN. No.
Is cured patch flammable?
UN. No.
Q. Are patch fumes toxic?
UN. No.
Q. Is patch adhesive harmful to skin?
UN. No, wash hands with soap and water after use.
Q. Can multiple layers be applied?
UN. sì, when additional strength is required. use more layers and curing them fully.
Q. Is it safe to use the patch to repair water pipe?
UN. sì, the patch is certified to contact drinking water system after curing.
For more information,Ci contatti per favore:
Sito web:www.panbi.en.alibaba.com
E-mail:[email protected]
Informazioni aggiuntive
| Luogo d'origine: | Cina |
|---|---|
| Servizio di elaborazione: | UV curing |
| Nome del prodotto: | Fiberglass Fix Tape |
| Materiale: | Fiberglass Reinforced Polyester |
| Caratteristica: | Harden like FRP steel |
| Parole chiave: | UV activated |