Classic And Simple Customized Gypsum Panel Supplier Line Production System

 Gypsum block machine

Gypsum Block Introduction:

Gypsum is the main raw material of gypsum block, after mixing with water,  then pour the slurry into shaper, after drying and then make light of the building gypsum products. You also can add the lightweight aggregate, fiber reinforced materials, foam and other supporting material in the production according to the performance requirements.

1. Normally specification of the gypsum block

500 mm × 666mm ×60mm

500 mm × 666mm × 80mm

500 mm × 666mm × 100mm (solid, hollow)  Hollow rate: 32%

2:Gypsum Block production line Capacity List

3:Gypsum block production line description:

It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.

Gypsum blocks production line consists of batch system, blending machine, forming machine, central hydraulic section, holding unit, machinery clamp and PLC controller .It adopts international advanced technology of hydraulic top rising of vertical mold forming and PLC controller . The gypsum blocks forming is being realized by full-automation, high-quality and accuracy . Our company makes forming machinery for gypsum blocks of both hollow and solid

1.Measuring system

Consisting of water metering device, powder metering device, compressed air systems and chassis and other components.

2. Mixer

Consisting of the mixer rack, stainless steel mixing tank, stainless steel openable top cover, the water pipe installed on the roof, stirrer and pouring cylinder which are equiped with with motor, etc.

3. Forming machine

The mold material adopts alloy steel that is electroplated with thick enough hard chrome on its surface and is mirror-polished. Then with high manufacturing accuracy and a fine adjustment structure of block dimensions to make sure all the blocks produced are of high precision, excellent surface finish, and also long life-span of the mold.

4. Central hydraulic station

Including high and low pressure oil pump and drive motor, fuel tank (with oiler, liquid level indicator, hook, etc.), electromagnetic valve, one-way throttle valve,etc.

5. Pneumatic flexible fixture

Pneumatic flexible fixture-on-rails: install fixturing trolley with wheels on two rails. The trolley can move at high or low speed, advance and retreat, and has the functions of brake positioning.

6. Automatic control system

The system uses programmable logic controller (PLC), and is composed of a button box, an electric control cabinet and other devices near the operators.

Gypsum block machine

We are manufacturer: 

Specialized in block machinery for over 20 years, we have rich expenrience and enjoy good reputation in China and foreign market. 

Technology and Quality:
We adopt most advanced and reliable technology and use Siemens motors.

Our Price:

Providing our customers best qualified machine and most satisfied service with lowest price is our permanent goal.

Q1: What is the Warranty for the machine?

A1: For the machine,we have 1 years warranty.If any quality problems on our side occured in this period ,we will take on the shipping cost and replacement.
Q2: What kinds of payment methods can be accept?
A2: Payment: T/T, Western Union, MoneyGram,PayPal; 30% deposits; 70% balance before delivery

Q3: Who will pay the delivery cost?
A3: customers need to pay delivery cost.

Q4:Who arrange shipping?
A4:We will arrange shipping for you if you don’t have special requirement

Q5: what’s the motor voltage?
A4: Our local voltage is 380v, 3phase, 50HZ, motor voltage could be customized to fit your local voltage

Q6: Do you have Operation Instruction Manual
A4: Yes.We will send the Operation Instruction Manual to you after you purchase the machine.