Two Way Conveyor Belt Emergency Stop Switch Safety Pull Switch
Description
Product Overview
MYLS-II two-way rope switch (manual)
Overview:The two-way rope pull switch is widely used in factories and mines with belt conveyors such as steel, cement, power plants, and mines. The product is installed on both sides of the belt conveyor and is a protective switch for emergency shutdown of the belt conveyor. Pull the steel wire rope at any point within the operating distance, cut off the operating circuit and stop the whole line, so as to protect the belt conveyor and personal safety.working principle:When an emergency occurs at the tape transportation site, pull the steel wire rope attached to the lifting lug to make the slider and switch in the machine function to send a stop signal. Loosen the wire rope and press the reset bar to resetInstallation and use:The switch is balanced on the fixed bracket of the rack;Tie the wire rope to the pull ring at the upper and lower ends of the rope pull switch. The rope on each side should not exceed 40 meters (it should be shortened to 25 meters when there is an inclination); the pressure of the rope should be appropriate to ensure reliable reset of the switch;The draw rope is set parallel to the tape, and a loop is added every 3 meters;Structural characteristics:The switch adopts high-quality travel switch and has a long service life. Good airtightness, dustproof, shockproof, anti-corrosion, etc. The casing is made of cast aluminum, with light weight and high hardness
Detailed Parameters
Reset method | manual reset |
Action angle | 30° |
Limit angle | 60° |
Number of contacts | 1 normally open; 1 normally closed Acting |
force | 10kg |
Contact capacity | 10~380V AC/DC |
Current | 1:5A |
Protection level | IP65 |
Reliability | >106 times |
Ambient temperature | -30℃~ +60℃ |
Relative humidity | no more than 85% |
Application
The products are used in electric power, coal mine, building materials, forestry, wharf metallurgy and other industries, and are specialized in belt conveyor for bulk material transportation.
Products Recommended
Logistics &Packaging
Company Profile
Shanghai Moying Instrument Co., Ltd. is an enterprise engaged in the production and sales of instruments for a long time. It has a deep foundation and rich experience in automation equipment. It is also a supplier of complete equipment solutions. Main products are: pull rope switch, material flow switch, deviation switch, slip switch, alarm and other products.
The company will give full play to its own advantages, adhering to the tenet of “leading technology, serving the market, treating people honestly and pursuing perfection”,Continue to innovate in technology, equipment, service and management to continue to develop more products to meet the needs of future development.
The company will give full play to its own advantages, adhering to the tenet of “leading technology, serving the market, treating people honestly and pursuing perfection”,Continue to innovate in technology, equipment, service and management to continue to develop more products to meet the needs of future development.
At the same time, we will also rely on our own technology and financial strength to actively carry out “production, learning and research” cooperation with peers at home and abroad, universities and research institutes.
FAQ
Q1：Difference between normally closed and normally open tilt switch？
A1：Normally closed is to switch on and off after tilting in vertical state, while normally open is to switch on after switching off tilt in vertical state.
Q2：The difference between manual reset and automatic reset?
A2：Manual reset is to pull the rope switch action to continue to hold after release, need to reset device to restore, automatic reset is pull rope switch action release switch recovery.
Q3：Difference between unidirectional pulling rope and bidirectional pulling rope?
A3：One way is to install the pull rope from one side of the switch, and the other way is to install the pull rope from both sides of the switch.
Q4：Is the action force of pull rope switch adjustable?
A4：The required action force can be informed in advance and can be customized according to the requirements.
A1：Normally closed is to switch on and off after tilting in vertical state, while normally open is to switch on after switching off tilt in vertical state.
Q2：The difference between manual reset and automatic reset?
A2：Manual reset is to pull the rope switch action to continue to hold after release, need to reset device to restore, automatic reset is pull rope switch action release switch recovery.
Q3：Difference between unidirectional pulling rope and bidirectional pulling rope?
A3：One way is to install the pull rope from one side of the switch, and the other way is to install the pull rope from both sides of the switch.
Q4：Is the action force of pull rope switch adjustable?
A4：The required action force can be informed in advance and can be customized according to the requirements.
Additional information
| Place of Origin: | China |
|---|---|
| Brand Name: | Moying |
| Model Number: | MYLS-2 |
| Max. Current: | / |
| Max. Voltage: | 380V |
| Reset method: | manual reset |
| Action angle: | 30° |
| Limit angle: | 60° |
| Number of contacts: | 1 normally open; 1 normally closed Acting |
| force: | 10kg |
| Contact capacity: | 10~380V AC/DC |
| Current: | 1:5A |
| Protection level: | IP65 |
| Reliability: | >106 times |
| Ambient temperature: | -30℃~ +60℃ |