Cement texture stucco paint polished concrete wall coating

Maydos cement effect concrete look finish stucco paint

Product description

Maydos Concrete Effect is an interior/exterior water based paint that creates the textural effect of polished concrete. Apply Concrete effect with a roller and finish off with a steel trowel to achieve the concrete appearance.

Características

Creates the textural effect of polished concrete

Benefits

Adds interest and style to any location

Where to use

New renderings or old plasters

Concrete surfaces

Old paints or dry, compact, absorbent, mineral coatings

Various absorbent mineral substrates

Insulating systems

Placas de gesso

Product Data

Application Data

The product is applied by

Escovar ; Roller ; Trowel

Cleaning of painting tools

Water

Theoretical coverage

1.0 – 1.7 kg/m2 in two coats, depending on the kind of substrate.

Dilution

No recommended.

Product preparation & aplicativo

Surface Preparation

For previously painted surfaces that are in good condition, dust, then clean with soap. For surfaces with cracks or holes, repair with appropriate filler. Spot prime repairs with Maydos Primer Sealer Undercoat. For glossy surfaces lightly sand to a dull finish.

For Plasterboard, Brick, Cement and bare timber apply 1 coat of Maydos Primer Sealer Undercoat. For Set Plaster, Fibrous Plaster, or Plasterglass, apply 1 coat of Maydos Sealer Binder.

Application Procedure And Equipment

To ensure evenness of color, pour all cans of Maydos Concrete Effect into a clean dry container. Stir thoroughly prior to use. Before you begin, test your chosen application method on a large piece of board.

Work in small sections. Use a long nap roller to apply Concrete Effect to the wall.

Smooth the surface with a steel trowel with broad, sweeping strokes, holding the trowel at a 60° to 80° angle. Be sure to keep the edge of trowel clean, by wiping any build up on the trowel edge with a wet cloth. Repeat this process over the entire wall.

Apply 2-3 coats using the same process. Applying additional coats will enhance the depth and appearance of the finish. The final coat should dry for at least 2 horas, but no longer than 24 horas, before polishing.

Using 600-grit sandpaper, lightly polish the surface in a circular motion. Use the edge of the trowel to further polish the surface. Apply enough pressure to keep the trowel edge flat against the surface. Be careful not to gouge the surface with the edge of the trowel.

For further protection, allow Concrete Effect to dry overnight and seal with one coat of Maydos wall varnish as overcoat.

Recommended paint system

Cartilha

Maydos anti-alkali primer M-003 : 1 coat

Top Coat

Maydos concrete effect paint : 2-3 coats

Over Coat (opcional)

Maydos wall varnish : 1 coat

Package and storage

Why Choose us?

1.One of the top 5 Chemical Company in China.

2.Rich experience in Transport of Chemical liquid goods.

3.Response timely with professional workable advise.

4.Wide range of chemical product provided,your best one-step purchase choice.

5.Site Instruction by engineer.

6.OEM Service Provided.

7.Free Sample For Test.