Low-cost automatic waste tire recycling equipment pyrolysis fuel

Beschrijving

Low-cost automatic waste tire recycling equipment pyrolysis fuel

Largest Pyrolysis Plant

Crude oil distillation machineOther pyrolysis plant machinery

Waster Plastic Pyrolysis Plant

Waste Plastic To Diesel Machine

Description of The Best Pyrolysis Machine

This is a batch type pyrolysis equipment, PL series, Simple pyrolysis plant, simple spary water system

Main Features of Pyrolysis Plant

The system use less water in the process of production, the cooling efficiency is high, it is suitable for the hardened ground, and the cooling pipe is easy to clean, which is suitable for the plastic with high amount of impurity.

Specifications of Pyrolysis Plant Machinery

Naam: 5-12Tons for example
Grondstof:Waste Tire, Plastic, Rubber, enz.
Oil output:40%-45%
Carbon output: 30%
Gas out put:10-20%
Heating value:300-400Kcal/ M3
Structure form:Horizontaal
Operating pressure:Constant pressure
Heating material: Nature gas, coal, pyrolysis oil, hout
Material of reactor:Stainless steel 310S
Cooling mode:Water spray cooling
Thickness of reactor :16 mm
Rotate speed of reactor :0.4turn/minute
Driving methodGear drive

Usage And Applied Raw Materials

Usage of The Equipment Pyrolysis:

Pyrolysing waste tire, rubber, plastic etc. to fuel oil,carbon black and steel wire.

Applied Raw Materials:

Rubber: tires, soles, leather strips, rubber tubes, and other rubber products.

Plastic: PP, PE, all kinds of plastic products

Final Production of Pyrolysis Plant

Fuel oil (40% tot 45%)

The oil has 40% tot 45% of the amount of recycled scrap tyres, which will be carried with licensed tanker trucks.

Carbon black (30% tot 35%)

Carbon Black is the main product recycled by Pyrolysis technology. The amount of recycled carbon black is 30% tot 35% (depending on the type of tyres) of the total amount of scrap tyres recycled in the system.

Stalen draad (10% tot 15%)

Tires contain steel wires and the amount range of 10% tot 15% of thetotal tyre wastage.

Gas (4% tot 10%)

Non-Condensable gases arise during the pyrolysis process. There aresome advantages such as:

1. lt has higher calorific value as compared to natural gas.

2. It can be replaced where natural gas and propane are stored.

3. The high energy gas may be utilized as a source of energy for the Pyrolysis process.

4. The amount of gas generated in the system is 12% tot 15% of the total amount of recycled tyres and considering the 10 ton scrap tyre/day recycling capacity, the facility generates 1200 -1500 m3/day gas, which has an enormous energy potential when evaluated.

Typical industrial applications of pyrolysis oil as a fuel:

· Burners of Boilers

· Burners of Furnaces

· Burners of Hot Water

· Burners of Hot Air Generators

· Burners of Thermic Fluid Heater

· Burners of Hot Mix Plants

· Other Industrial Burners

· Electric Generators (mixed with 50% diesel)

· Diesel Pumps(mixed with 50% diesel)

Carbon Black:

Used as fuel in boiler/furnaces/cement plants, raw material for manufacturing carbon nano-tubes & activated carbon

Pyrolysis Gas:

Used as fuel to heat the plastic to oil reactor. Excess gas can be used for production of petrochemicals or electricity

Oil test report:

The continuous plant can get diesel directly which can meet Euro 3, Euro 4, Euro 5 standard.

Working Process of Pyrolysis Plant

First put wast tires into the vessel. After the material is fully loaded, then door of reactor is closed and tighten.

We need to start the burning system using coal, gas or oil and when the temperature reach 150 Deg.C, mixed oil in small quantity start coming out and oil recovery increase gradually as temperature reach 300 Deg.C and once the temperature reach 400 Deg.C, oil is fully recovered.

After getting all the oil, firing is stopped and temperature is brought down by using cooling system and then door is opened to get the rough carbon black and steel waste.

Then we put another tires for next shift production.

Detailed Pictures of Pyrolysis Factory

Waarom voor ons kiezen

1. 17 years experience in pyrolysis technology

2. Professional installation and manufacture team

  • Service and Support

Know-how transfer, engineering and design of the whole process furthermore

We suggest following services for consultancy, supervision during the erection and commissioning with test run.

Ruixin project engineer will go to the site and offer instruction for the machine installation, the commissioning and test run. Duration is totally 30 dagen, including travel time.

  • Installation terms:

The buyer should provide double tickets, food, accommodation, Local traffic in buyer’s country and accident assurance, as well as salary of 80USD per day for seller’s engineer during installation and commissioning.

3. Rich experience in foreign trade

Verpakking en verzending

Feedback van kopers:

Ruixin is your global partner in sustainable tyre pyrolysis projects. Would you like us to consult us for your waste tyre pyrolysis project? We are looking forward to your enquiry.

Extra informatie

plaats van herkomst:

Hainan, China

Merknaam:

RESEM

Type:

Rubber Machine

Voorwaarde:

Nieuw

Video uitgaande inspectie:

Mits

Machinetestrapport::

Mits

Marketingtype::

Nieuw product 2020

Garantie van kerncomponenten:

1 Jaar

Kern onderdelen:

PLC, Motor, Motor, Pressure vessel

Tire Machine Type:

Tire Recycling Machine

Spanning:

380V/50HZ

Dimensie(L*W*H):

2600*6600mm

Certificering:

CE-ISO

Garantie:

1 Jaar

Dienst na verkoop geleverd:

Veldinstallatie, inbedrijfstelling en training, Ingenieurs beschikbaar om machines in het buitenland te onderhouden

Belangrijkste verkoopargumenten:

Duurzaam

Stroom (kW):

40 kW

Gewicht (KG):

30 KG

Na garantieservice:

Veldonderhoud en reparatieservice

Toepasselijke industrieën::

fabriek:, Construction works , Energie & Mining

Lokale servicelocatie:

Geen

Showroomlocatie:

Geen

Grondstof:

Waste Plastic, tyre, rubber

Naam:

Pyrolysis Technology For Waste

Final product:

Carbon Black, Fuel Oil, Wire

Reactor life:

5-8 jaren

Material of reactor:

Q245R/Q345R Boiler Steel

Pyrolysis Aim:

Fuel Oil Carbon Black

Gas out put:

10-20%

Oil output::

40%-45%

Functie:

Extract Diesel Oil